Kompaktomat is especially suitable for preparation of the sowing bed after ploughing. The sowing bed is processed from 0 to 10 cm. Enables variability of working members.
The wide span variant of the Kompaktomat machine is manufactured in the working width of 12.5 m and 15.7 m. It is designed for large agricultural holdings equipped with tractors with power up to 600 HP.
During one run the soil is perfectly processed to the state required for sowing of crops. The advantage of the machine is excellent levelling of the surface, fine crumbling of clods and formation of well-compacted sowing bed. The land is perfectly levelled also due to smoothing harrows that can level and spread even high unevenness.
Due to high working speed, high working performance can be achieved even with lower working span of the Kompaktomat machine. A key consideration here is that due to its well-considered design and favourable weight Kompaktomat can prepare the soil after ploughing during one run, whereas the soil is processed not only on the surface, but in the whole horizon.
During the run Kompaktomat performs several working operations, during which the surface of the soil is levelled and compacted to the depth. In the cultivated soil capillarity is restored and in the required depth the sowing bed is formed. The clods are finely crumbled. To achieve an ideal level, Kompaktomat is equipped with three smoothing harrows. The front leveller is located in front of the roller so that the machine can level and spread even high unevenness.
Optionally the combinator can be equipped with hydraulic adjustment of depth of the share section and hydraulic adjustment of the front leveller.
The control elements of the presowing combinator are designed in order to achieve maximum safety of workers. Simple but quality construction with minimum maintenance requirements.
All variants are equipped with folding for transport so that the machine does not exceed the maximum transport width of 3 metres and maximum transport height of 4 metres. Folding is hydraulic and fully automatic.
High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.
Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.
The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.
Differences between individual sections are described in more detail in the tab Accessory
Special production technology of eXtra STEEL line enables using very strong treated materials not only for working members of a machine but also for extremely loaded parts of main frames and adjusting mechanisms. The frames of machines on very exposed places are formed by sections of high strength steel having multiple strengths in comparison to common structural material of good quality. Thanks to eXtra STEEL line technology the machines have smaller weight and much higher service life in the most demanding operation conditions.
More information about the technology of eXtra STEEL line production can be found at the information website.
K 1250 MAX
K 1570 MAX
|Working width||mm||12 500||15 700|
|Transport width||mm||3 000||3 000|
|Transport height||mm||3 500||3 500|
|Total machine length||mm||9 550||9 550|
|Working depth||mm||0 - 100||0 - 100|
|Number of shares – arrow A
Number of shares – chisel B
Number of shares – arrow C
|Working performance||ha/h||12 - 15||13 - 20|
|Towing vehicle 1||kW
|Working speed||km/h||10 - 14||10 - 14|
|Maximum transport speed 4||km/h||20||20|
|Maximum slope availability||°||6||6|
|Dimension of tyre - transport||19,0/45-17||19,0/45-17|
|Brake type / distribution 3||air / two-line||air / two-line|
|Required pressure 3||kPa||8,5||8,5|
|Dimensions of brakes||300/60||300/60|
|Number of hydraulic circuits / pressure||bar||4 / 200||5 / 200|
|Number of quick-coupling devices / type||8 / ISO 12,5||10 / ISO 12,5|
Tractor hitch requirement
|mm||600 - 650||600 - 650|
|Tractor hitch requirement
Hole diameter of lower hitch pin
|mm||50 / ball K80
|50 / ball K80
|Axle load||kg||4350 / 4350||5000 / 5000|
|Machine weight 2||kg||10 500||12 500|
1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine variant weight: front bar roller, section A, rear crosskill roller with leveller.
3 Alternative of the brake type: hydraulic, pressure 130 ± 5 bar (designed for the French market).
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
Proper selection of the type of the roller contributing significantly to the final quality of the processing is very important. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.
|Resistance against clogging||●●●○||●●●●||●●○○||●●●○||●●●●|
|Suitability for stony soils||●●○○||●●○○||●●●○||●●●○||●●●○|
|Suitability for wet soils||●●○○||●●●○||●○○○||●●●○||●●●●|
The share section is equipped with arrow ploughshares of the width 25 cm in two rows. Each of the shares is protected with leaf spring. This share section is suitable for lighter soil conditions without plant residues. By default, the height-adjustable coordination rail is located behind the shares.
The share section is equipped with narrow chisels of the width 3.5 cm in four rows. This share section is suitable for soil processing in spring when it is not desirable to extract wet soil to the surface, or in heavy soils. By default, the coordination rail is not located behind the shares.
The universal ploughshare section is equipped with arrow ploughshares of the width 25 cm in two rows. The shares are mounted on plough beams with geometry improving the passability of plant residues. Proto je tato radličková sekce vhodná na pozemky s vyšším výskytem nadrcených rostlinných zbytků i do těžkých půd. By default, the height-adjustable coordination rail is located behind the shares.
Number of rows of shares (pcs) /
|2 / 400||4 / 240||2 / 490|
|Leveller behind shares||●●●●||○○○○||●●●●|
|Suitability for light soils||●●●●||●●●●||●●●●|
|Suitability for medium soils||●●●○||●●●○||●●●●|
|Suitability for heavy soils||●●●○||●●●○||●●●●|
|Suitability for stony soils||●●●○||●●●○||●●●●|
|Suitability for wet soils||●●○○||●●●●||●●○○|
|Resistance against clogging||●●○○||●●●○||●●●○|
Can also be installed additionally to older machines.
Can also be installed additionally to older machines.