Cultivator Fantom is especially suitable for full-area post harvest stubble-breaking with intensive mixing effect. The soil is processed up to the depth of 20 cm. It allows stubble-breaking, loosening and pre-sowing preparations.
The tines contain plough beams spun from the spring steel with the diameter of 35 x 35 mm equipped with a special tine or double-side chisel.
For levelling the surface after ploughshares the asymmetric harrow consisting of rods are used. The harrow is characterized by efficient levelling effect and high passability for plant residues. The tube roller provides optimum recompaction of the soil and also precise deep guiding of the machine.
Due to its design, the Fantom cultivator is very versatile and can be used both for stubble breaking, pre-sowing soil processing or incorporation of manure. Low machine weight decreases loading of the rear parts of tractors during transport. Thanks to its simple and massive design, the Fantom cultivator offers an optimal compromise between the acquisition price and utility value.
Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform. Setting of the working depth or levelling harrows in this case is a simple mechanical adjustment of the machine.
The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.
Special production technology of eXtra STEEL line enables using very strong treated materials not only for working members of a machine but also for extremely loaded parts of main frames and adjusting mechanisms. The frames of machines on very exposed places are formed by sections of high strength steel having multiple strengths in comparison to common structural material of good quality. Thanks to eXtra STEEL line technology the machines have smaller weight and much higher service life in the most demanding operation conditions.
More information about the technology of eXtra STEEL line production can be found at the information website.
|Technical parameters||Units||Fantom 300 N||Fantom 350 N||Fantom 470 NS|
|Working width||mm||3 000||3 500||4 700|
|Transport width||mm||3 000||3 000||3 000|
|Transport height||mm||1 330||1 380||1 930|
|Total machine length||mm||3 330||3 330||3 450|
|Working depth||mm||40 – 150||40 – 150||40 – 150|
|Number of ploughshares||pcs||13||16||22|
|Number of ploughshare rows||pcs||3||3||3|
|Release force of ploughshares||kg||450||450||450|
|Working performance||ha/h||2,4 – 3,6||2,8 – 4,2||3,7 – 5,5|
|Towing vehicle 1||kW
|110 - 165
150 - 225
|120 - 180
160 - 240
|150 - 225
200 - 300
|Working speed||km/h||8 – 12||8 – 12||8 – 12|
|Maximum transport speed 3||km/h||20||20||20|
|Maximum slope availability||°||6||6||6|
|Number of hydraulic circuits / pressure||bar||1 / 200|
|Number of hydrocouples / type||2 / ISO 12,5|
|Tractor hitch requirement||TPH cat. 2 and 3||TPH cat. 2 and 3||TPH cat. 2 and 3|
|Machine weight 2||kg||1 200||1 350||2 000|
1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with tube roller.
3 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
N - carried machine
NS - carried foldable machine
Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.
|Resistance against clogging||●○○○||●●●●||●●●●|
|Suitability for stony soils||●●●○||●●●○||●●●○|
|Suitability for wet soils||●○○○||●●●●||●●●●|