Do you like this machine? Write to us.
Mám zájem o stroj

1

Ground levelling zone. It can be used well in seedbed preparation.

2

Loosening zone. Loosening depth 4 - 15 cm. Optimized geometry chisels in four rows with small final spacing ensure very fine full-area loosening and intensive soil mixing with plant residues.

3

Wave-levelling zone. Levelling discs also increase the effect of incorporating plant residues.

4

Clod crumbling and soil reconsolidation zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise. The rollers can be also easily removed and work with no rollers.

The half-carried 5-row modular cultivator Fantom PRO with low traction resistance and variable depth of soil processing is suitable for spring, summer and autumn work and thanks to its modularity it can start the spring work very soon since it can handle even more wet soil.

Excellent passability of plant residues

The plough beams with spacing of 190 mm are located in 5 rows. Due to its optimized distribution in combination with a high framework clearance of 655 mm an excellent passability of plant residues and resistance to clogging are achieved. The tapping system of V-ploughs and chisels enables their easy and fast replacement.

Fantom PRO is equipped with an integrated axle and tracing wheels. Due to this, it is possible to operate the machine without rear accessories (e.g. rollers or harrows). The quick-clamping system is used for attachment of the rear accessories. This way the disconnection or connection is a question of several minutes.

The half-carried 5-row modular cultivator Fantom PRO with low traction resistance and variable depth of soil processing is suitable for spring, summer and autumn work and thanks to its modularity it can start the spring work very soon since it can handle even more wet soil.

Excellent passability of plant residues

The plough beams with spacing of 190 mm are located in 5 rows. Due to its optimized distribution in combination with a high framework clearance of 655 mm an excellent passability of plant residues and resistance to clogging are achieved. The tapping system of V-ploughs and chisels enables their easy and fast replacement.

Fantom PRO is equipped with an integrated axle and tracing wheels. Due to this, it is possible to operate the machine without rear accessories (e.g. rollers or harrows). The quick-clamping system is used for attachment of the rear accessories. This way the disconnection or connection is a question of several minutes.

Possibility to work even without the rear roller

The rear accessories is connected through the parallelogram ensuring perfect copying of the terrain and consequently the modular system enables replacement or full disconnection of the rear rollers and other accessories. Due to the integrated axle, the machine can operate without the rear accessories when the ploughshares or chisels located behind the wheels perform smoothing and cultivation of the formed traces. The integrated axle also ensures good manoeuvrability and quick turning during operation and during transport as well. The high frame clearance of 655 mm provides optimum passability and adaptability to field conditions. Quality loosening and cultivation of the soil with subsequent incorporation of plant residues with relatively low traction resistance is ensured by the replaceable ploughshares or chisels. Possible replacement of ploughshares is quick and easy thanks to the quick-clamping system (wedge or pin).

Possibility to work even without the rear roller

The rear accessories is connected through the parallelogram ensuring perfect copying of the terrain and consequently the modular system enables replacement or full disconnection of the rear rollers and other accessories. Due to the integrated axle, the machine can operate without the rear accessories when the ploughshares or chisels located behind the wheels perform smoothing and cultivation of the formed traces. The integrated axle also ensures good manoeuvrability and quick turning during operation and during transport as well. The high frame clearance of 655 mm provides optimum passability and adaptability to field conditions. Quality loosening and cultivation of the soil with subsequent incorporation of plant residues with relatively low traction resistance is ensured by the replaceable ploughshares or chisels. Possible replacement of ploughshares is quick and easy thanks to the quick-clamping system (wedge or pin).

High variability

Tips of ploughshares are standardly fitted with plates of cemented carbides ensuring prolonged service life and optimum geometry of ploughshare throughout the lifetime of the machine. There are the levelling disks located behind the ploughshares. The disks ensure levelling of the soil surface. To obtain optimum surface structure and good recompaction, there is an option of an appropriate rear roller. The thrust of the rollers can be selected – either with the weight of the connecting device or with the hydraulic force. When the working depth is changed, the thrust is automatically adapted so that the soil is compacted with the same force. There are several types of rear rollers. The roller provides recompaction of the soil, crumbling of clods and levelling of the area surface. Thanks to the quick-clamping system it is possible to easily replace the rollers, e.g. for the bar harrows, or operate absolutely without the rear accessories. Readjustment of the machine can be performed while the vehicle is in motion through the hydraulic circuits.

High variability

Tips of ploughshares are standardly fitted with plates of cemented carbides ensuring prolonged service life and optimum geometry of ploughshare throughout the lifetime of the machine. There are the levelling disks located behind the ploughshares. The disks ensure levelling of the soil surface. To obtain optimum surface structure and good recompaction, there is an option of an appropriate rear roller. The thrust of the rollers can be selected – either with the weight of the connecting device or with the hydraulic force. When the working depth is changed, the thrust is automatically adapted so that the soil is compacted with the same force. There are several types of rear rollers. The roller provides recompaction of the soil, crumbling of clods and levelling of the area surface. Thanks to the quick-clamping system it is possible to easily replace the rollers, e.g. for the bar harrows, or operate absolutely without the rear accessories. Readjustment of the machine can be performed while the vehicle is in motion through the hydraulic circuits.

High performance

  • High working speed up to 12 km/h.
  • Low traction resistance and excellent mixing of the soil due to the optimized design of tines.
  • Full-area undercut when V-ploughs are used.
  • A reliable quick-clamping system of tines (wedge, screw) saves time.
  • Easy operation and manoeuvrability.
  • Quick turning on the transport wheels.
  • Setting of the working depth and comfortable control of the flexi-board during the vehicle driving from the tractor cabin.
  • Maintenance-free working members placed in hard metal bushes.
  • Excellent penetration of the tines into the soil.
  • Precise depth guidance even during operation without the rollers thanks to the tracing wheels.
  • Hydraulically adjustable thrust of the rollers.

High performance

  • High working speed up to 12 km/h.
  • Low traction resistance and excellent mixing of the soil due to the optimized design of tines.
  • Full-area undercut when V-ploughs are used.
  • A reliable quick-clamping system of tines (wedge, screw) saves time.
  • Easy operation and manoeuvrability.
  • Quick turning on the transport wheels.
  • Setting of the working depth and comfortable control of the flexi-board during the vehicle driving from the tractor cabin.
  • Maintenance-free working members placed in hard metal bushes.
  • Excellent penetration of the tines into the soil.
  • Precise depth guidance even during operation without the rollers thanks to the tracing wheels.
  • Hydraulically adjustable thrust of the rollers.

 Kypřič Fantom PRO

1 2 3
4

 

  1. Hydraulically controlled front flexi-board leveller for smoothing of the soil surface and crumbling of clods before the whole processing.
  2. Working members in 5 rows and hydraulically adjustable working depth while the vehicle is in motion.
  3. The rear coordination disks located behind the working bodies in front of the row of rollers with the aim to level the soil surface in front of the rollers are easily height-adjustable.
  4. Optional rear rollers for various conditions and possibility to work even without the rear roller which can be replaced by the flexi-board or harrow through the quick-clamping system; the machine is turning on its chassis.

Fantom PRO - presowing combinator

Cultivator Fantom PRO

1 2 3
4

 

  1. Cutting discs for cutting plant residues and clods.
  2. Working members in 5 rows and hydraulically adjustable working depth while the vehicle is in motion.
  3. Three rows of harrows for spreading plant residues and levelling the surface.
  4. A finish roller for final surface levelling.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

High-strength materials
High-strength refined materials used for crucial nodes to ensure long service life. Strongly dimensioned frame of high-strength steels.
Massive storage
Massive placing of all rotary storages ensures prolonged service life. Furthermore, it is an easily rebuildable solution.
Abrasion resistant steel
The time-tested tines are made of high-strength abrasion resistant steels fitted with plates of cemented carbides. The variant with hard facings along the guiding increases the operational life of the tines even more.
Spring protection
Resistant and maintenance-free spring protection with high release force of 310 kg on the tip of the tine.
Incorporation of plant residues
Due to higher clearance of the frame and wider space between the shares, Fantom PRO can be used for full-area post harvest stubble-breaking with intensive mixing effect. Excellently incorporates plant residues into the soil.
Quick clamping system of tines
The quick clamping system of tines (wedge, screw) enables very fast replacement of the shares without risk of loss of the working parts.

Easy operation

Due to minimum of adjusting points the operation and subsequent maintenance are very easy steps that anybody can perform.

Adjustment of working depth
Easy working depth setting using the hydraulic circuit of the machine chassis.
Thrust of rollers
The thrust of rollers is provided by the weight of the rollers and it can be increased with the hydraulic circuit.
Adjustment of flexi-board
Simple adjustment of the flexi-board can be performed while the vehicle is in motion through the hydraulic circuit.
Quick clamping system of rollers
Simple disconnection and connection of the rear rollers – possibility of working without the rear rollers.

Smartly designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.

Skilful when turning in the field
The cultivator is equipped with an integrated axle. Easy turning on the transport wheels at headlands.
Optimal distribution of share beams
The optimal distribution of share beams was enabled by the elongated frame with high spacing of 190 mm.
High frame clearance
The high frame clearance of 655 mm provides excellent passability of plant residues.
Good stability at work due its design
The floating drawbar ensures perfect copying of the terrain.
Folding system
A unique folding system enabling the machine with the working span up to 7.9 m to be folded to the transport width of 3 m and height of 4 m and thus complies with the regulations for operation of vehicles on the road network.
Full-area stubble-breaking
When equipped with V-ploughs, it can be used for full-area undercut up to the depth of 15 cm.

Technical parameters

Technical parameters Units Fantom
650 PRO
Fantom
800 PRO
Fantom
850 PRO
Fantom
1050 PRO
Fantom
1250 PRO
Working width mm 6 500 8 000 8 500 10 500 12 500
Transport width mm 3 000
(3 060) 3
3 000
(3 060) 3
3 000
(3 060) 3
3 000
(3 060) 3
3 000
(3 060) 3
Transport height mm 3 530 3 998 4 275 3 700  3 998 
Total machine length mm  9 640  9 640 9 640  9 640  9 640 
Working depth mm 40 - 150
(180) 3
40 - 150
(180) 3
40 - 150
(180) 3
40 - 150
(180) 3
40 - 150
(180) 3
Number of ploughshares pcs 35 43 45 57 67
Ploughshare spacing mm 190 190 190 190 190
Number of ploughshare rows pcs 5 5 5 5 5
Row spacing mm  790 790 790 790  790 
Release force of ploughshares kg 310 310 310 310 310
Number of supporting wheels pcs 2 2 2 2 2
Number of transport wheels pcs 4 6 6 8 8
Frame clearance mm   655 655 655 655  655 
Working performance ha/h 5,2 - 7,8 6,4 - 9,6 6,8 - 10,2 8,4 - 12,6 10,0 - 15,0
Towing vehicle 1 kW
HP
200 - 300
270 - 405
230 - 350
310 - 475
245 - 370
330 - 495
295 - 400
400 - 550
400 - 440
550 - 675
Working speed km/h  8 - 12 8 - 12 8 - 12  8 - 12  8 - 12 
Maximum transport speed 4 km/h  20 20 20 20   20
Maximum slope availability ° 6  6
Number of hydraulic circuits / pressure bar 5 / 200  5 / 200 5 /200  5 / 200  5 / 200
Number of quick-coupling devices / type   12 / ISO 12,5  12 / ISO 12,5 12 / ISO 12,5  12 / ISO 12,5  12 / ISO 12,5 
Tractor hitch requirement   pin Ø 50, 70 mm; ball K80
Machine weight 2 kg 7 850 8 950 9 150 11 160 14 480


1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Depends on the type of the roller used.
3 When elongated chisels for the maximum depth of 180 mm are used.
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

PRO - the transport axle is placed in front of the rear roller

Accessories

Rollers

Disk roller
Diameter 525 mm
Weight 220 kg/m
Double ring roller
Diameter 500 mm
Weight 191 kg/m
Tube roller
Diameter 500 mm 
Weight  143 kg/m
Double spiked roller
Diameter 420 mm
Weight 159 kg/m

Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.

Roller Double ring
DRR
Double spiked
DSR
Tube
TR
Disk
SDR
Crumbling ●●●○ ●●○○ ●●○○ ●●●○
Stamping ●●●● ●●●○ ●●●○ ●●●●
Depth guiding ●●●● ●●●● ●●●○ ●●●●
Resistance against clogging ●●●● ●●●● ●○○○ ●●●○
Suitability for stony soils ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●●●● ●●●● ●○○○ ●●●●
Heavy soils ●●●● ●●●● ●●○○ ●●●●
Medium soils ●●●● ●●●● ●●●○ ●●●●
Light soils ●●●● ●●●○ ●●●● ●●●○

Harrows

Flexi-board + herse
Weight 62.5 kg/m
Three-row harrow + Bar roller
Diameter 300 mm
Weight 165 kg/m
Harrow Flexi-board + harrow

Three-row harrow + Bar roller
Crumbling ●●○○ ●●●●
Stamping ●○○○ ●○○○
Resistance against clogging ●●●● ●●○○
Suitability for stony soils ●●○○ ●●○○
Heavy soils ●●○○ ●●○○
Medium soils ●●●● ●●●○
Light soils ●●●● ●●●●

Chisel

Chisel 50 MULTICARBIDE
Share width 50 mm
Share body hardness up to 55 HRC
Widia plate hardness up to 92 HRA
Hardness of hard facing up to 60 HRC
Share service life + 400-600 %
Chisel 50 MULTICARBIDE PRO
Share width 50 mm
Share body hardness up to 50 HRC
Widia plate hardness up to 92 HRA

 

Dláto 40 CARBIDE s výměnnými křídly
V-plough width 280 mm
V-plough thickness 6 mm 
Body hardness 50 HRC

Pro celoplošné podříznutí


Rear levellers

Flexi-board
Coulters

Variants of hinges

Loop for the lower hinge Ø 50, Ø 70 mm
Hitch K80 Ø 80 mm