Do you like this machine? Write to us.
Mám zájem o stroj

 

1 Full-area loosening zone. The double-row disc section with aggressive geometry ensures perfect full-area undercut to depth of 4 - 12 cm with intensive mixing of plant residues. The disc section also spreading well plant residues over the area.
2 Clod crumbling and soil reconsolidation zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise.

Disk plough-harrow Softer

 

1 2

 

  1. Disks with the diameter of 510 mm / Ø 560 mm located in two rows will undercut the soil. Working depth is 5-12 cm.
  2. Clods are crumbled by the rear roller.

Disks with dentate circumference

Disks with the diameter of 510 / 560 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.

The disks are placed in maintenance-free bearings with excellent service life. Optimum geometry of disks ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The disks retain ideal working angle even with partially worn geometry of disks. The disk spacing of 24 cm ensures good free flow of plant residues.

Disks with dentate circumference

Disks with the diameter of 510 / 560 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.

The disks are placed in maintenance-free bearings with excellent service life. Optimum geometry of disks ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The disks retain ideal working angle even with partially worn geometry of disks. The disk spacing of 24 cm ensures good free flow of plant residues.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

  • Maintenance-free placement of the disks.
  • Maintenance-free rubber mounting.
High-strength materials
High-strength refined materials used for crucial nodes to ensure long service life. Strongly dimensioned frame of high-strength steel.
Maintenance-free placement of disks
Maintenance-free placement of the disks ensuring operation of the machine with no need of additional lubrication.
Maintenance-free rubber mounting
Resistant and maintenance-free rubber mounting for adaptation to terrain with protection against overload.

Easy operation

Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.

  • Minimum of adjustment points.
  • Minimum of lubrication points.
  • No angles adjustments or translation of disks are needed.
Continuous connection of runs
The extreme disk is separately height-adjustable which allows continuous connection of runs.
Direction of the processed soil
The height and longitudinally adjustable side deflector for ideal direction of the processed soil.
Adjustment of working depth
Easy and continuous adjustment of the working depth using the pins on the coupling bars of rollers in disk plough-harrows Softer 4,5 NS and Softer 6 NS. (substitutable by hydraulic control – optional)
Adjustment of working depth
Easy adjustment of the working depth using the pins on the roller beams of Softer 3 N.

Smartly performed designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.

  • Skilful when working in the field due to a short compact design.
  • Light construction of the machine with no need of weighing down results in low operating costs.
  • Very good self-cleaning capabilities of the space between the disk and the plate for fixing the disk.
Full-perimeter disc edges
Easier disc soil penetration.
Piston rod cover
The cover of the piston rod controlling the rollers and distance washers against stones flying off the rear disks. (optional equipment for Softer 4,5 NS and Softer 6 NS – hydraulic control of rollers)
Micro Drill Seeding Unit
The sophisticated design of the machine allows for an installation of the Micro Drill Seeding Unit for sowing catch crop or for planting grass directly.
SynCult Manure Applicator
Complete set of additional equipment for the Softer NS Disc Cultivator for all-area application of manure.

Technical parameters

Technical parameters Units Softer 2,5 N Softer 3 N Softer 3,5 N
Working width mm 2 400  2 900 3 500
Transport width mm 2 500  3 000 3 500
Transport height mm 1 370  1 370  1 370
Total machine length mm 2 500  2 500 2 500 
Working depth mm 35 - 120  35 - 120  35 - 120
Number of disks – front row
Number of disks – rear row
pcs 10
10
12
12
14
14
Diameter of disks mm 510 / 560 510 / 560 510 / 560
Working performance ha/h 2,5 - 3,8 3 - 4,5  3,5 - 5,3
Towing vehicle 1 kW
HP
65 - 100
90 - 140
 80 - 120
110 - 165
 90 – 140
120 – 190 
Working speed km/h  10 - 15  10 - 15 10 - 15
Maximum transport speed 4 km/h 25 25 25
Maximum slope availability °  11  11 11
Tractor hitch requirement   TPH cat. 2 and 3 TPH cat. 2 and 3 TPH cat. 2 and 3
Machine weight 2 kg 1 400 1 540    1 950
Technical parameters Units Softer 4,5 NS Softer 5 NS   Softer 6 NS
Working width mm 4 500 5 000  6 000
Transport width mm 3 000   3 000  3 000 
Transport height mm  2 500 3 000 3 300 
Total machine length mm  2 700 2 700  2 700 
Working depth mm 35 - 120  35 - 120   35 - 120
Number of disks – front row
Number of disks – rear row
pcs 19
19
21
21
25
25
Diameter of disks mm 510 / 560  510 / 560 510 / 560
Working performance ha/h  4,5 - 6,75  5 - 7,5  6 - 9
Towing vehicle 1 kW
HP
120 - 180
160 - 240 
130 - 190
175 - 255
150 - 225
200 - 300 
Working speed km/h 10 - 15  10 - 15  10 - 15
Maximum transport speed 4 km/h 25 25 25
Maximum slope availability ° 11 11  11
Number of hydraulic circuits / pressure 3 bar  1(2) / 200  1(2) / 200  1(2) / 200
Number of hydrocouples / type 3   2(4) / ISO 12,5   2(4) / ISO 12,5  2(4) / ISO 12,5
Tractor hitch requirement   TPH cat. 3  TPH cat. 3 TPH cat. 3
Machine weight 2 kg 2 950   3 150 3 650 


1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with LTX roller.
3 By default, 1 folding circuit, but optional hydraulic control of rollers, then 2 circuits.
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

N - carried machine
NS - carried foldable machine

Accessories

Rollers

Disk roller
Diameter 580 mm
Weight 220 kg/m
Double roller
Diameter 400/300 mm
Weight 120 kg/m
LTX roller
Diameter 586 mm
Weight 200 kg/m
Ring roller
Diameter 520 mm
Weight 160 kg/m
Tube roller
Diameter 510 mm
Weight 90 kg/m
V roller
Diameter 580 mm
Weight 175 kg/m

Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.

Roller Tube-shaped
TR
Double
DR
 Ring
RR
LTX  Disk
SDR
Crumbling ●●○○ ●●●○ ●●●○ ●●○○  ●●●○
Stamping ●●●○ ●●●○ ●●●● ●●●● ●●●●
Depth guiding ●●●○ ●●●● ●●●● ●●●● ●●●●
Resistance against clogging ●○○○ ●●●○ ●●●● ●●●○ ●●●○
Suitability for stony soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●○○ ●●●● ●●●● ●●●●
Heavy soils ●●○○ ●●●● ●●●● ●●●● ●●●●
Medium soils ●●●○ ●●●● ●●●● ●●●● ●●●●
Light soils ●●●● ●●●● ●●●● ●●●○ ●●●○

 

Roller VR
Crumbling  ●●●○
Stamping  ●●●●
Depth guiding  ●●●●
Resistance against clogging  ●●●●
Suitability for stony soils  ●●●○
Suitability for wet soils  ●●●●
Heavy soils  ●●●●
Medium soils  ●●●●
Light soils  ●●●●

Disks

Disk Ø 560 mm
Disk Ø 510 mm

Variants of hinges

TPH category 3

For Softer 4,5 NS and Softer 6 NS.
The pins for TPH category 4 can be exchanged.

TPH categories 2 and 3

For Softer 3 N.


Optional equipment

Hydraulic control of rollers

For Softer 4,5 NS and Softer 6 NS.

Micro Drill

Seeding of fine seeds.

Set of weights

For Softer 3 N (340 kg).