Do you like this machine? Write to us.
Mám zájem o stroj

 

1 Full-area loosening zone. The double-row disc section with aggressive geometry ensures perfect full-area undercut to depth of 4 - 12 cm with intensive mixing of plant residues. The disc section also spreading well plant residues over the area.
2

Clod crumbling and soil reconsolidation zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise.

High performance and quality of work

  • High working speed up to 15 km/h.
  • Gear disks for safe penetration into the soil and intensive mixing.
  • Working angle of the disks and pressure to each disk ensure uncompromising penetration even to heavy and over-dried soils and perfect undercut of the processed profile.
  • High quality rubber mounting for optimal working angles of the disk.
  • Precise deep guiding with optimum soil compaction.

Diskový podmítač Softer

 

1 2

 

  1. Disks with the diameter of 510 mm / 560 mm located in two rows will undercut the soil. Working depth is 3,5-12 cm.
  2. Clods are crumbled by the rear roller.

Disks with dentate circumference

Disks with the diameter of 510 mm / 560 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.

The disks are placed in maintenance-free bearings with excellent service life. Optimum geometry of disks ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The disks retain ideal working angle even with partially worn geometry of disks. The disk spacing of 24 cm ensures good free flow of plant residues.

Disks with dentate circumference

Disks with the diameter of 510 mm / 560 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.

The disks are placed in maintenance-free bearings with excellent service life. Optimum geometry of disks ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The disks retain ideal working angle even with partially worn geometry of disks. The disk spacing of 24 cm ensures good free flow of plant residues.

Robustní konstrukce

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

  • maintenance-free placement of the disks
  • maintenance-free rubber mounting

Robustní konstrukce

High-strength materials
High-strength refined materials used for crucial nodes to ensure long service life. Strongly dimensioned frame of high-strength steels.
Maintenance-free placement of disks
Maintenance-free placement of the disks ensuring operation of the machine with no need of additional lubrication.
Maintenance-free rubber mounting
Resistant and maintenance-free rubber mounting for adaptation to terrain with protection against overload.

Jednoduchá obsluha

Easy operation

Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.

  • Minimum of adjustment points.
  • Minimum of lubrication points.
  • No angles adjustments or translation of disks are needed.

Jednoduchá obsluha

Continuous connection of runs
The extreme disk is separately height-adjustable which allows continuous connection of runs.
Direction of the processed soil
The height and longitudinally adjustable side deflector for ideal direction of the processed soil.
Adjustment of working depth
Easy adjustment of the working depth according to the overview table using the distance washers on the roller piston rods.

Chytře řešená konstrukce stroje

Smartly performed designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.

  • Skilful when working in the field due to a short compact design.
  • Light construction of the machine with no need of weighing down results in low operating costs.
  • Very good self-cleaning capabilities of the space between the disk and the plate for fixing the disk.

Chytře řešená konstrukce stroje

Full-perimeter disc edges
Easier disc soil penetration.
Piston rod protection
Protection of the folding piston rod against flying stones.
Permanent pressure of the side frames
Automatic terrain tracing and permanent pressure of the side frames in Softer 8 and Softer 11 PS due to compensating accumulation vessel.
Micro Drill Seeding Unit
The sophisticated design of the machine allows for an installation of the Micro Drill Seeding Unit for sowing catch crop or for planting grass directly.

Technické parametry

Technical parameters Units Softer
4 FIX P
Softer
4,5 PS
Softer
5 PS
Working width mm 4 100 4 600 5 080 
Transport width mm 4 330 3 000 3 000 
Transport height mm 1 600 2 650  2 900
Total machine length mm 6 675 6 675 6 675 
Working depth mm 35 – 120  35 – 120 35 – 120 
Number of disks – front row
Number of disks – rear row
pcs 17
17
19
19
21
21
Diameter of disks mm 510 / 560  510 / 560 510 / 560 
Working performance ha/h 4 – 6 4,5 – 6,8 5 – 7,5 
Towing vehicle 1 kW
HP
110 – 160
150 - 215
120 – 180
160 - 240
130 – 190
175 - 255
Working speed km/h 10 – 15  10 – 15 10 – 15 
Maximum transport speed 5 km/h 20  20 20 
Maximum slope availability ° 6
Dimension of tyre - transport    400/60-15,5 400/60-15,5 400/60-15,5 
Brake type / distribution 4, 5        
Required pressure 4 kPa      
Number of hydraulic circuits / pressure bar 2 / 200 3 / 200 3 / 200
Number of hydrocouples / type   4 / ISO 12,5 6 / ISO 12,5 6 / ISO 12,5
Tractor hitch requirement    TBZ cat. 3 TBZ cat. 3 TBZ cat. 3 
Machine weight 2 kg  3 600 4 000 4 350 
Technical parameters Units Softer
6 PS
Softer
8 PS
Softer
11 PS 6
Working width mm 6 000 7 650 10 880
Transport width mm 3 000 3 000 3 000
Transport height mm 3 370 4 000 4 000
Total machine length mm 5 740 6 850 6 520
Working depth mm 35 – 120 35 – 120 35 – 120
Number of disks – front row
Number of disks – rear row
pcs 25
25
31
31
45
45
Diameter of disks mm 510 / 560 510 / 560 510 / 560
Working performance ha/h 6 - 9 8 - 12 11 – 16,5
Towing vehicle 1 kW
HP
150 – 225
200 - 300
200 – 300
270 - 405
245 – 370
330 - 495
Working speed km/h 10 – 15 10 – 15 10 – 15
Maximum transport speed 5 km/h 20 20 20
Maximum slope availability ° 6 6 6
Dimension of tyre - transport   400/60-15,5 500/50-17 500/50-17
Brake type / distribution 4, 5     air / two-line air / two-line
Required pressure 4 kPa   8,5 8,5
Number of hydraulic circuits / pressure bar 3 / 200 3 / 200 3(4) / 200
Number of hydrocouples / type   6 / ISO 12,5 6 / ISO 12,5 6(8) / ISO 12,5 3
Tractor hitch requirement   TBZ cat. 3 TBZ cat. 3 TBZ cat. 3
Machine weight 2 kg 4 990 6 700 9 200


1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with LTX roller.
3 An additional hydraulically controlled supporting leg for the version of the machine with a drawbar attached to the fixed bottom hitch.
4 Alternative of the brake type: hydraulic, pressure 130 ± 5 bar (designed for the French market).
5 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
6 When selecting the rollers of disk plough-harrow Softer 11, first contact the sales representative of the company Farmet a. s.

PS - half-carried foldable machine

Accessories

Rollers

Disk roller
Diameter 580 mm
Weight 220 kg/m
Double ring roller
Diameter 540/540 mm
Weight 195 kg/m

 

Double ring roller cannot be used for Softer 11 PS.

Double roller
Diameter 400/350 mm
Weight 120 kg/m
LTX roller
Diameter 586 mm
Weight 200 kg/m
Ring roller
Diameter 520 mm
Weight 160 kg/m
Tube roller
Diameter 510 mm
Weight 90 kg/m
V roller
Diameter 580 mm
Weight 175 kg/m

Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.

Roller Tube-shaped
TR
Double
DR
 Ring
RR
Double ring
DRR
LTX 
Crumbling ●●○○ ●●●○ ●●●○ ●●●○ ●●○○
Stamping ●●●○ ●●●○ ●●●● ●●●● ●●●●
Depth guiding ●●●○ ●●●● ●●●● ●●●● ●●●●
Resistance against clogging ●○○○ ●●●○ ●●●● ●●●● ●●●○
Suitability for stony soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●○○ ●●●● ●●●● ●●●●
Heavy soils ●●○○ ●●●● ●●●● ●●●● ●●●●
Medium soils ●●●○ ●●●● ●●●● ●●●●  ●●●●
Light soils ●●●● ●●●● ●●●● ●●●●  ●●●○

 

Roller Disk
SDR
VR
Crumbling  ●●●○ ●●●○
Stamping ●●●● ●●●●
Depth guiding ●●●● ●●●●
Resistance against clogging ●●●○ ●●●●
Suitability for stony soils ●●●○ ●●●○
Suitability for wet soils ●●●● ●●●●
Heavy soils ●●●● ●●●●
Medium soils ●●●● ●●●●
Light soils ●●●○ ●●●●

Disks

Disk Ø 560 mm
Disk Ø 510 mm

Variants of hinges

TPH category 3

The pins for TPH category 4 can be exchanged.

Loop for the lower hinge Ø 50 mm, Ø 70 mm
Hinge K80 Ø 80 mm

Optional equipment

Two-line single-circuit air brakes
Hydraulic control of axle

For Softer 4.5 PS and Softer 6 PS. (Included in the standard equipment of Softer 8 PS and Softer 11 PS.)

Micro Drill

Seeding of fine seeds.

Set of pins for TPH hinge category 4
Supporting tracing wheels

They cannot be used for Softer 4,5 PS; one set included in the standard equipment of Softer 11 PS.