Do you like this machine? Write to us.
I am interested in the machine

1

Tractor track loosening zone. Perfect loosening of the tracks eliminates uneven emergence of plants after sowing.

2

Basic soil levelling zone. Precisely leveled soil surface allows uniform subsequent consolidation and loosening the seedbed.

3

Soil pre-consolidation zone by the front roller. The front roller crumbs clods on the surface, but at the same time it consolidates the soil and restores the soil capillarity.

4

Seedbed zone. The soil is loosened by the share section to the set depth. The depth should be the same as the future sowing depth. Arrow shares allow full-area undercut and weed control.

5

Wave-levelling zone behind a share loosening section.

6

Rear roller soil consolidation zone. The roller finely crumbles clods and ensures the final consolidation of the seedbed so that the soil capillarity is fully restored. Intensive soil capillarity moisture rise ensures good emergence of plants even in the dry season.

7

Final soil levelling zone. The rear bar or final rollers ensure a perfect leveled surface with minimum clods for subsequent sowing.

Presowing combinators Kompaktomat are time-tested machines designed for pre-sowing preparation of the soil after ploughing.

Wide range of working spans

Half-carried machines are offered with the working span from 3 m to 9.7 m. Wide range of working spans covers both small farmers with small tractors and large agricultural holdings equipped with powerful tractors.

Excellent levelling of the surface, fine crumbling of clods

During one run the soil is perfectly processed to the state required for sowing of crops. The advantage of the machine is excellent levelling of the surface, fine crumbling of clods and formation of well-compacted sowing bed. The land is perfectly levelled also due to smoothing harrows that can level and spread even high unevenness.

Presowing combinators Kompaktomat are time-tested machines designed for pre-sowing preparation of the soil after ploughing.

Wide range of working spans

Half-carried machines are offered with the working span from 3 m to 9.7 m. Wide range of working spans covers both small farmers with small tractors and large agricultural holdings equipped with powerful tractors.

Excellent levelling of the surface, fine crumbling of clods

During one run the soil is perfectly processed to the state required for sowing of crops. The advantage of the machine is excellent levelling of the surface, fine crumbling of clods and formation of well-compacted sowing bed. The land is perfectly levelled also due to smoothing harrows that can level and spread even high unevenness.

A single run perfectly prepares the soil for sowing of crops

Due to high working speed, high working performance can be achieved even with lower working span of the Kompaktomat machine. A key consideration here is that due to its well-considered design and favourable weight Kompaktomat can prepare the soil after ploughing during one run, whereas the soil is processed not only on the surface, but in the whole horizon.

During the run Kompaktomat performs several working operations, during which the surface of the soil is levelled and compacted to the depth. In the cultivated soil capillarity is restored and in the required depth the sowing bed is formed. The clods are finely crumbled. To achieve an ideal level, Kompaktomat is equipped with three smoothing harrows. The front leveller is located in front of the roller so that the machine can level and spread even high unevenness.

Easy operation and possibility of aggregation with other machines

Optionally the combinator can be equipped with hydraulic adjustment of depth of the share section and hydraulic adjustment of the front leveller. Half-carried machines can also be equipped with the rear three-point linkage of category 2, where additional crumbling crosskill rollers can be aggregated. These rollers are suitable especially for summer when hard dry clods must be intensively crumbled. Aggregation of the sowing machine and formation of productive sowing combination is another possibility. For this purpose Kompaktomat can also be equipped with additional water distribution.

Minimum maintenance requirements

The control elements of the presowing combinator are designed in order to achieve maximum safety of workers. Simple but quality construction with minimum maintenance requirements.

WRONG
During unequal processing of the soil there is a danger of wrong and unequal introduction of plants.
CORRECT
Uniform processing of the soil using presowing combinator Kompaktomat determines equal introduction of plants.

High performance and quality of work

  • 7 operations performed during one run.
  • High working speed up to 14 km/h.
  • Excellent recompaction and restoration of soil capillarity ensuring equal introduction.
  • Precise adjustment of the depth of the ploughshare ensures precise preparation of the sowing bed for each crop.
  • Automatic protection of ploughshares ensures trouble-free operation.
  • Excellent levelling effect of field unevenness.

High performance and quality of work

  • 7 operations performed during one run.
  • High working speed up to 14 km/h.
  • Excellent recompaction and restoration of soil capillarity ensuring equal introduction.
  • Precise adjustment of the depth of the ploughshare ensures precise preparation of the sowing bed for each crop.
  • Automatic protection of ploughshares ensures trouble-free operation.
  • Excellent levelling effect of field unevenness.

Presowing combinator Kompaktomat

1 2 3 4 5 6 7

 

  1. Tractor trail cultivators for lifting of the compacted soil.
  2. Front smoothing harrow for coarse levelling of the surface.
  3. Front roller for rough crumbling of clods.
  4. Share working section undercuts and cultivates the soil.
  5. Central smoothing harrow levels the cultivated soil and the soil is directed below the rear roller.
  6. The rear roller for fine soil processing
  7. The rear smoothing harrow levels the surface.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

High-strength materials
High-strength refined materials used for crucial nodes to ensure long service life. Heavily designed frame.
Robust smoothing harrow
The robust front smoothing harrow ensuring removal of upper layers of topsoil.
Protection of ploughshares
Automatically unprotected ploughshares.

Easy operation

Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.

  • Minimum of adjustment points.
  • Minimum of lubrication points.
Front smoothing harrow
Adjustment of the height of the front smoothing harrow.
Smoothing harrow behind ploughshares
Adjustment of the height behind the arrow ploughshares.
Working depth
Adjustment of working depth of the ploughshares.

Smartly designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.

Folding for the transport is designed so that:

  • the machine does not exceed the maximum transport width of 3 metres and maximum transport height of 4 metres (with the exception of Kompaktomat K 800 PS)
  • folding is hydraulic and fully automatic

Smartly designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.

Folding for the transport is designed so that:

  • the machine does not exceed the maximum transport width of 3 metres and maximum transport height of 4 metres (with the exception of Kompaktomat K 800 PS)
  • folding is hydraulic and fully automatic

Option of several types of share sections

Differences between individual sections are described in more detail in the tab Accessory

Section AL
Section CF
Section AP

Possibility of aggregation with other machines

Half-carried presowing combinators Kompaktomat K 300 P – K 1000 PS enable aggregation with other devices or machines. For this purpose they must be additionally equipped with the rear three-point linkage of category 2; it is equipment above standard.

Aggregation of presowing combinators Kompaktomat with additional rollers
For aggregation with e.g. crumbling rollers it is sufficient to additionally equip the combinator with the rear three-point linkage only.
Aggregation of presowing combinators Kompaktomat with the sowing machine
For aggregation with a pneumatic sowing machine, the combinator can be extended by the hydraulic fan drive and hydraulic circuit for control of the sowing machine markers.

Technical parameters

Technical parameters – unbraked variant

Technical parameters Units Kompaktomat
K 300 P
Kompaktomat
K 400 PS
Kompaktomat
K 450 PS
Kompaktomat
K 500 PS
Kompaktomat
K 600 PS
Working width mm 3 000 4 000 4 500 5 000 6 000
Transport width mm 3 000 3 000 3 000 3 000 3 000
Transport height mm  1 650 2 670  3 030  2 790 3 230
Total machine length mm 5 965 5 965 5 965 6 105 6 105
Working depth mm 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100
Number of shares – arrow A
Number of shares – chisel B
Number of shares – arrow C
pcs 13
30
12
18
39
16
20
47
20
23
49
23
27
59
24
Working performance ha/h 2,2 - 3,2 3 - 4 3,5 - 4,5 3 - 5 3,5 - 6
Towing vehicle 1 kW
HP
70
95
90
125
110
150
120
165
130
180
Working speed km/h 10 - 14 10 - 14 10 - 14 10 - 14 10 - 14
Maximum transport speed 4 km/h 20 20 20 20 20
Maximum slope availability ° 11 6 6 6 6
Dimension of tyre - transport   400/60-15,5 400/60-15,5 400/60-15,5 19,0/45-17 19,0/45-17
Number of hydraulic circuits / pressure bar  2 / 200 2 / 200  2 / 200 2 / 200 2 / 200
Number of quick-coupling devices / type    4 / ISO 12,5 4 / ISO 12,5  4 / ISO 12,5 4 / ISO 12,5 4 / ISO 12,5

Tractor hitch requirement
Axial spacing of lower suspension joints
(alternative spacing)

mm 1 010
(920)
1 010
(920)
1 010
(920)
1 010
(920)
1 010
(920)
Tractor hitch requirement
Hole diameter of lower suspension joints for machine suspension pins
(alternative Ø)
mm 37,5
(29)
37,5
(29)
37,5
(29)
37,5
(29)
37,5
(29)
Axle load kg 1 960 2 080 2 240 2 730 2 950
Machine weight 2 kg 2 360 3 010 3 340 4 025 4 360

 

Technical parameters – braked variant

Technical parameters Units Kompaktomat
K 500 PS
Kompaktomat
K 600 PS
Kompaktomat
K 700 PS
Kompaktomat
K 800 PS
Kompaktomat
K 1000 PS
Working width mm 5 000 6 000 7 000 8 000 9 850
Transport width mm 3 000 3 000 3 000 3 000 3 000
Transport height mm  2 790 3 230 3 830  4 000 4 000
Total machine length mm 6 105 6 105 6 105 6 105 6 660
Working depth mm 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100
Number of shares – arrow A
Number of shares – chisel B
Number of shares – arrow C
pcs 23
49
23
27
59
24
31
69
31
35
77
32
43
91
38
Working performance ha/h 3 - 5 3,5 - 6 4,5 - 7 5,5 - 8 8,5 - 10
Towing vehicle 1 kW
HP
120
165
130
180
150
205
160
220
180
245
Working speed km/h 10 - 14 10 - 14 10 - 14 10 - 14 10 - 14
Maximum transport speed 4 km/h 20 20 20 20 20
Maximum slope availability ° 6 6 6 6 6
Dimension of tyre - transport   19,0/45-17 19,0/45-17 19,0/45-17 19,0/45-17 19,0/45-17
Brake type / distribution 3   air / two-line air / two-line air / two-line air / two-line air / two-line
Required pressure 3 kPa 8,5 8,5 8,5 8,5 8,5
Dimensions of brakes   300/60 300/60 300/60 300/60 300/60
Number of hydraulic circuits / pressure bar  2 / 200 2 / 200  2 / 200 2 / 200 2 / 200
Number of quick-coupling devices / type    4 / ISO 12,5 4 / ISO 12,5  4 / ISO 12,5 4 / ISO 12,5 4 / ISO 12,5

Tractor hitch requirement
Axial spacing of lower suspension joints
(alternative spacing)

mm 1 010
(920)
1 010
(920)
1 010
(1 045)
1 010
(1 045)
1 010
(1 045)
Tractor hitch requirement
Hole diameter of lower suspension joints for machine suspension pins
(alternative Ø)
mm 37,5
(29)
37,5
(29)
37,5
(50)
37,5
(50)
37,5
(50)
Axle load kg 2 730 2 950 3 360 3 620 4 520
Machine weight 2 kg 4 025 4 360 4 960 5 345 6 920


1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine variant weight: front bar roller, section A, rear crosskill roller with leveller.
3 Alternative of the brake type: hydraulic, pressure 130 ± 5 bar (designed for the French market).
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

P - half-carried machine
PS - half-carried foldable machine

Accessories

Rollers

Crosskill roller
Diameter 400 mm
Weight 170 kg/m 

 

May be applied as the rear roller only.

Excellent work in light, medium and heavy soils, quality compaction and clod crumbling.

Double crosskill roller
Diameter 400 mm
Weight 202 kg/m 

 

May be applied as the rear roller only.

Excellent work in light, medium and heavy soils, quality compaction and clod crumbling. When compared to crosskill roller, more intense clod crumbling.

Spiral bar roller
Diameter 400 mm
Weight 60 kg/m

 

May be applied as the front and rear roller.

Quality clod crumbling. Suitable for wet conditions.

Bar roller
Diameter 400 mm
Weight 60 kg/m

 

May be applied as the front and rear roller.

Quality clod crumbling. Not very suitable for wet conditions.

Ring roller
Diameter 400 mm
Weight 115 kg/m

 

May be applied as the front and rear roller.

Quality work in all types of soil, good depth guiding, suitable even for more humid soils.

Proper selection of the type of the roller contributing significantly to the final quality of the processing is very important. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.

Rollers Crosskill
CR
Double crosskill
DCR
Bar
BR
Spiral bar
SB
Ring
RR
Crumbling  ●●●● ●●●● ●●●○ ●●●○ ●●○○
Stamping  ●●●● ●●●● ●●●○ ●●●○ ●●●●
Depth guiding  ●○○○ ●●○○ ●●●● ●●●● ●●●●
Resistance against clogging  ●●●○ ●●●● ●●○○ ●●●○ ●●●●
Suitability for stony soils  ●●○○ ●●○○ ●●●○ ●●●○ ●●●○
Suitability for wet soils  ●●○○ ●●●○ ●○○○ ●●●○ ●●●●
Heavy soils  ●●●○ ●●●● ●●○○ ●●○○ ●●●○
Medium soils  ●●●● ●●●● ●●●○ ●●●○ ●●●○
Light soils  ●●●● ●●●● ●●●● ●●●● ●●●○

Ploughshares

Kompaktomat ploughshare

For the AL / AP section.

Chisel CARBIDE

For the CF section.

Blade of elastic share

For the CF section.


Section

Section AL

The share section is equipped with arrow ploughshares of the width 25 cm in two rows. Each of the shares is protected with leaf spring. This share section is suitable for lighter soil conditions without plant residues. By default, the height-adjustable coordination rail is located behind the shares.

Section CF

The share section is equipped with narrow chisels of the width 3.5 cm in four rows. This share section is suitable for soil processing in spring when it is not desirable to extract wet soil to the surface, or in heavy soils. Behind the ploughshares, the directing rail is placed as standard.

Section AP

The universal ploughshare section is equipped with arrow ploughshares of the width 25 cm in two rows. The shares are mounted on plough beams with geometry improving the passability of plant residues. Proto je tato radličková sekce vhodná na pozemky s vyšším výskytem nadrcených rostlinných zbytků i do těžkých půd. By default, the height-adjustable coordination rail is located behind the shares.

Section AL CF AP

Number of rows of shares (pcs) /
Row spacing (mm)

2 / 400  4 / 240  2 / 490 
Leveller behind shares ●●●● ○○○○ ●●●●
Full-area processing ●●●● ●●●○ ●●●●
Suitability for light soils ●●●● ●●●● ●●●●
Suitability for medium soils ●●●○ ●●●○ ●●●●
Suitability for heavy soils ●●●○ ●●●○ ●●●●
Suitability for stony soils ●●●○ ●●●○ ●●●●
Suitability for wet soils ●●○○ ●●●● ●●○○
Resistance against clogging ●●○○ ●●●○ ●●●○

Trail cultivators

Trail cultivator with arrow share CA

Automatically unprotected tractor trail cultivator with the arrow share. More suitable for lighter soils without the risk of “dragging” of wet clods to the surface.

Trail cultivator with chisel share CC

Automatically unprotected tractor trail cultivator with the chisel share. More suitable for heavier soils with the risk of “dragging” of wet clods to the surface.


Levellers

Fixed leveller

Automatically unprotected leveller in the toothed profile. Massive construction for precise smoothing of the rough furrow.
FL = fixed mechanical skid, FH = fixed hydraulic skid.

Shovel leveller

Automatically unprotected leveller from separate flexible segments. Better clod crumbling.
CBH = scoop skid, FB = finish-board skid.


Finish section

Smoothing harrow

Passive levelling of the soil surface behind the rear roller. It can be applied behind all types of rear rollers.

Stops of the smoothing harrow

Swing stops for possibility of more aggressive adjustment of the rear smoothing harrow.

Finish roller

Active crumbling of remaining clods behind the rear roller. Possible to apply behind all types of rear single-row rolls.


Rear linkage – aggregation with other machines

Hydraulic circuit for control of the sowing machine markers

Possibility of additionally mounting a single-hose or two-hose circuit for controlling the sowing machine markers to the Kompaktomat machine with the rear TPS.

Hydraulic circuit for drive of the sowing machine fan

Circuit for drive of pneumatic sowing machine fan can be optionally mounted on Kompaktomat with rear TPH.

Rear hitch TPH category 2 + 3

In the rear part of the half-carried Kompaktomat machines, the rear hitch for aggregation with other machine can be installed. Part of the rear suspension is a two-hose circuit for folding the additional equipment.


Variants of hinges

Hitch TPH

T2, T3, T4 – aggregation into arms of the rear hitch.

T2 – drawing pins Ø 28 mm
T3 – drawing pins Ø 36 mm
T4 – drawing pins Ø 50 mm

Loop for the lower hitch

C40, C50, C70 – aggregation into the solid agro-linkage. Maximum vertical load of the towing eye 3,000 kg.

C40 – drawing pin Ø 40 mm
C50 – drawing pin Ø 50 mm
C70 – drawing pin Ø 70 mm

Hitch K80 Ø 80 mm

K80 – aggregation into the solid agro-linkage. Maximum vertical load of the towing eye 3,000 kg.
K80 – towing ball 80 mm


Optional equipment

Hydraulic control of the depth

Increased productivity:

  • control from the comfort of the tractor cabin
  • possibility of continuous change in the position setting according to the current conditions without having to stop the set
  • elimination of unpleasant physical effort

Can also be installed additionally to older machines.

Hydraulic control of levellers

Increased productivity:

  • control from the comfort of the tractor cabin
  • possibility of continuous change in the position setting according to the current conditions without having to stop the set
  • elimination of unpleasant physical effort

Can also be installed additionally to older machines.