The four-row Terrix cultivators ensure high soil and crop residue permeability with excellent incorporation and a levelling effect. While Terrix offers excellent mixing and overall soil cultivation, Terrix Dual offers gradual deep loosening by zones with above-standard effect of crop residue incorporation.
A four-row chisel cultivator with a wide range of application from shallow stubble cultivation to deep loosening of up to 35cm. Overall loosening of the cultivated horizon with intense mixing of crop residue. Highly versatile, suitable for all types of soil.
The Terrix chisel cultivator is equipped with four rows of working parts with the spacing of 84cm in a row. The final spacing of chisels is 21cm and it provides intense overall loosening in the entire soil profile being processed. The release force of the chisels of 450kg allows very deep soil loosening, up to the depth of 35cm. The chisels can be equipped with wings for quality undercut for shallow work during stubble cultivation. There are levelling discs after each row of deepening chisels.
The four-row Terrix Dual chisel cultivator operates on the principle of gradual soil cultivation up to the depth of 35cm with a significantly better quality of loosening and a very high, two-level effect of crop residue incorporation. The soil surface is processed both along the entire area and by deep zone loosening in a single pass.
The Terrix Dual chisel cultivator is equipped with four rows of working parts with the spacing of 84cm in a row. Unlike Terrix, the chisels are configured in tandem so there is gradual deepening during loosening. That significantly improves the quality of loosening and reduces the pulling resistance. There are levelling discs behind the second and fourth row of chisels. This layout significantly increases the effect of crop residue incorporation when compared with conventional cultivators. Terrix Dual is an ideal alternative to tillage. It works especially well in heavier soils with a large quantity of crop residue.
High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.
Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.
Special production technology of eXtra STEEL line enables using very strong treated materials not only for working members of a machine but also for extremely loaded parts of main frames and adjusting mechanisms. The frames of machines on very exposed places are formed by sections of high strength steel having multiple strengths in comparison to common structural material of good quality. Thanks to eXtra STEEL line technology the machines have smaller weight and much higher service life in the most demanding operation conditions.
More information about the technology of eXtra STEEL line production can be found at the information website.
|Technical parameters||Units||Terrix 450 PS||Terrix Dual 450 PS||Terrix 600 PS||Terrix Dual 600 PS|
|Working width||mm||4 500||4 500||6 000||6 000|
|Transport width||mm||3 000||3 000||3 000||3 000|
|Transport height||mm||3 340||3 340||4 000||4 000|
|Total machine length||mm||10 500||10 500||10 500||10 500|
|Working depth||mm||100 - 350||100 - 350||100 - 350||100 - 350|
|Number of ploughshares||pcs||22||22||30||30|
|Distance between ploughshares||mm||200||200||200||200|
|Number of ploughshare rows||pcs||4||4||4||4|
|Pitch of rows||mm||min. 940||min. 940||min. 940||min. 940|
|Release force of ploughshares||kg||450||450||450||450|
|Diameter of levelling discs||mm||460||460||460||460|
|Working performance||ha/h||3,6 - 5,4||3,6 - 5,4||4,8 - 7,2||4,8 - 7,2|
|Towing vehicle 1||kW
|225 - 350
300 - 450
|225 - 350
300 - 450
|350 - 460
450 - 600
|350 - 460
450 - 600
|Working speed||km/h||8 - 12||8 - 12||8 - 12||8 - 12|
|Maximum transport speed 4||km/h||20||20||20||20|
|Maximum slope availability||°||6||6||6||6|
|Dimensions of tyre – transport||19.0/45-17||19.0/45-17||19.0/45-17||19.0/45-17|
|Brake type / distribution 3, 4||without / air||without / air||without / air||without / air|
|Required pressure 3||kPa||5,5||5,5||5,5||5,5|
|Number of hydraulic circuits / pressure||bar||4+1 / 200||4+1 / 200||4+1 / 200||4+1 / 200|
|Number of hydro-couples / type||8 / ISO 12,5||8 / ISO 12,5||8 / ISO 12,5||8 / ISO 12,5|
|Tractor hitch requirement||bottom hitch K80; lug Ø 50, 70 mm|
|Machine weight 2||kg||7 300||7 300||8 000||8 000|
1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with the LTX roller.
3 Alternative to hydraulic brake / operating pressure of 130 ± 5 bar.
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
PS - half-carried foldable machine
Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.
|Resistance against clogging||●●●○||●●●●||●●●●||●●●○||●●●○|
|Suitability for stony soils||●●●○||●●●○||●●●○||●●●○||●●●○|
|Suitability for wet soils||●●○○||●●●●||●●●●||●●●●||●●●●|
|Resistance against clogging||●●●●|
|Suitability for stony soils||●●●○|
|Suitability for wet soils||●●●●|