Do you like this machine? Write to us.
Mám zájem o stroj

1 Zone reversible storage of fertilizers. The fertilizer is placed on each side of the seed row, approx. 6 cm from the seed to a depth of 6 - 10 cm. Two-sided application of fertilizers allows to increase the dose of fertilizers and their more effective use during vegetation. At the same time, the two application coulters system ensures pre-processing and compacting of the seeding tape and reduces the coulter pressure. 
2 Seedbed formation and seed placement zone. The double disc coulters effectively create a compacted seedbed (V-groove) and precisely deposit the seed to the required depth. The compacted seedbed and V groove ensure excellent seed contact with soil and soil water. 
3 The side seed press zone. The copy wheel compresses the V-groove with the seed, causing the seed to squeeze sideways to the soil. There is loosened space above the seed for easy emergence of plants.    

 Precise Impact Seed Drill

1 2

 

  1. Double-sided fertilisation with disc units.
  2. Seeding units for precise seed distribution.

Impact is designed for precise seeding of wide-row crops (maize, sunflower, and rapeseed) with the option of additional fertilization using granulated fertilizers. Impact has a massive frame ensuring precise placement of the fertilizer and the seeds in the required depth, also in heavier soil conditions.

The system of tandem-configured disc fertilization units not only provides precise double-sided placement of fertilizer in the root zone, but also strip-till pre-processing allowing for subsequent precise placement of seeds into the prepared seedbed.

The design of the Impact seed drill allows reaching high working speed according to the soil conditions: from 10 to 15km/h.

Impact is designed for precise seeding of wide-row crops (maize, sunflower, and rapeseed) with the option of additional fertilization using granulated fertilizers. Impact has a massive frame ensuring precise placement of the fertilizer and the seeds in the required depth, also in heavier soil conditions.

The system of tandem-configured disc fertilization units not only provides precise double-sided placement of fertilizer in the root zone, but also strip-till pre-processing allowing for subsequent precise placement of seeds into the prepared seedbed.

The design of the Impact seed drill allows reaching high working speed according to the soil conditions: from 10 to 15km/h.

High performance and quality of work

  • High working speed of up to 15km/h, high seeding amount reliability.
  • Highly advanced system of electronic control of each seed.
  • Electronic control of all functions of the machine during work – ISO bus system.
  • Double-sided fertilization with tandem-configured disc units.
  • Strip-till soil pre-processing and seedbed preparation.

High performance and quality of work

  • High working speed of up to 15km/h, high seeding amount reliability.
  • Highly advanced system of electronic control of each seed.
  • Electronic control of all functions of the machine during work – ISO bus system.
  • Double-sided fertilization with tandem-configured disc units.
  • Strip-till soil pre-processing and seedbed preparation.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

  • High-strength materials are used on key points for long-term durability.
Hydraulic folding
Hydraulic folding into the transportation position.
Maintenance-free bearings of all discs
Maintenance-free bearing of all discs providing machine operation without the need of lubrication.
Resistant bearings of fertilising units
Resistant and maintenance-free rubber bearing of fertilization units for adjustment to the terrain with overload protection.
Highly resistant seeding units
Highly resistant seeding units with flexible down pressure.

Granulated fertiliser hopper alternatives

Precise Impact seed drill + modular Falcon SW seed drill
Hopper capacity 4,000 litres
Precise Impact seed drill + Monsun MF front hopper
Hopper capacity 1,100 litres

Technical parameters

Technical parameters Units Impact 6 Impact 8
Working width mm 4 500 6 000
Transport width mm 3 000 3 000
Transport height mm 2 400  
Total machine length mm 2 350 2 350
Working depth mm 100  100 
Hopper capacity / 1 drill coulter l 35 35
Pressure of drill coulters kg 40 40
Diameter of sowing discs mm 390 390 
Working performance ha/h 4,5 - 6  6 - 9 
Towing vehicle 1 kW
HP
75
100 
90
125 
Working speed km/h  6 - 15 6 - 15 
Maximum transport speed 3 km/h 20  20 
Maximum slope availability ° 6
Required pressure 2 kPa  8
Number of hydraulic circuits / pressure bar 3 / 200   3 / 200
Number of hydro-couples / type   6 / ISO 12,5  6 / ISO 12,5 
Oil flow for machine control l/min 30 30
Electric system requirement  A 30 30
Tractor hitch requirement   TBZ cat. 3 TBZ cat. 3
Machine weight kg 2 700 3 200


1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Alternative to hydraulic brake / operating pressure of 130 ± 5 bar.
Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

Accessories

Display Units

BASIC-Terminal
Equipment  
Display Dimensions 5,7" 
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Rail Line Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 1
Camera Input x
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

COMFORT-Terminal
Equipment  
Display Dimensions 10,4"
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Rail Line Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 1
Camera Input x
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

TOUCH800®
Equipment  
Display Dimensions 8"
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Rail Line Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 2
Camera Input OK
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

TOUCH1200®
Equipment  
Display Dimensions 12,1"
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Rail Line Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 5
Camera Input OK
GSM Modem OK

Müller Elektronik: ISOBUS DRILL-Controller

x Nelze dokoupit 
OK V základní výbavě