TRIOLENT NS

Tillage up to 35 cm with intensive mixing

Technology

Tine cultivator Triolent N/NS

Triolent NS: Stubble cultivation to depth from 6 to 20 cm

Triolent NS: Tillage to depth of 35 cm

1	Tillage zone. The tillage depth has a wide range of 6–35 cm. For tillage from 6 to 20 cm can be used wings to full-surface undercut. The tines arranged in three rows with optimized geometry ensure excellent tillage and intensive mixing soil with crop residues.
2	Furrow-levelling zone. Levelling discs also increase the effect of incorporating crop residues.
3	Clods crumbling and soil compaction zone. Optimum soil re-compaction ensures good water infiltration and soil water capillarity to the surface.

High performance and quality of work

High working speed up to 12 km/h.
Low pulling requirement and excellent soil mixing due to tines optimized design.
Excellent throughflow of crop residues.
The spiral shape of tines upper part for controlled soil flow.
Maintenance-free working units fitted with carbide plates for minimal wear.

High working speed up to 12 km/h.
Low pulling requirement and excellent soil mixing due to tines optimized design.
Excellent throughflow of crop residues.
The spiral shape of tines upper part for controlled soil flow.
Maintenance-free working units fitted with carbide plates for minimal wear.

Technics

Tine cultivator Triolent N/NS

The massive tines arranged in 3 rows ensure quality soil tillage and incorporation of crop residues.
The levelling discs for perfect levelling of surface.
The back roller provides optimal soil re-compaction, crumbling clods and levelling surface.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

High-strength materials

High-strength refined materials used for crucial nodes to ensure long service life. Strongly dimensioned frame of high-strength steel.

Abrasion-resistant steel

The time-tested tines are made of high-strength abrasion-resistant steels.

Incorporation of crop residues

Chisels with wings for full-surface undercut up to 20 cm depth. Ideal for incorporation of a large quantity crop residues.

Spring protection

Durable and maintenance-free spring protection with high release force of 450 kg.

Graph of release force

Protection against overload

Effective machine protection and working units against damage.

Easy operation

Due to minimum adjusting and lubricating points the operation and subsequent maintenance are very easy steps that everybody can perform.

Minimum adjustment points.
Minimum lubrication points.

Working depth adjustment

Easy working depth adjustment by the pin on the rollers.

Adjustable levelling disks

Height-adjustable levelling discs with practical handle for better adjusting ergonomics.

Smartly performed designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high work variability.

Micro Drill Seeding Unit

The sophisticated machine design allows an installation Micro Drill Seeding Unit for sowing catch crop or planting grass directly.

More information about Micro Drill >

Parameters

Technical parameters	Units	Triolent TX 300 N	Triolent TX 350 N	Triolent TX 380 NS	Triolent TX 400 N FIX	Triolent TX 470 NS
Working width	mm	3 000	3 500	3 800	4 000	4 700
Transport width	mm	3 000	3 500	2 300	4 000	3 000
Transport height	mm	1 400	1 400	2 500	1 400	2 500
Total machine length	mm	4 060	4 060	4 050	4 050	4 050
Working depth	mm	60–350	60–350	60–350	60–350	60–350
Number of tines	pcs	10	13	13	13	16
Tine spacing	mm	290	250	290	290	290
Number of tine rows	pcs	3	3	3	3	3
Row spacing	mm	780	780	780	780	780
Release force of tines	kg	450	450	450	450	450
Frame clearance	mm	880	880	880	880	880
Diameter of levelling discs	mm	460	460	460	460	460
Working performance	ha/h	2,4–3,6	2,8–4,2	3,1–4,5	3,2–4,8	3,7–5,6
Towing vehicle ¹	kW HP	110–165 150–225	120–175 160–240	125–190 170–255		150–220 200–300
Working speed	km/h	8–12	8–12	8–12	8–12	8–12
Maximum transport speed ³	km/h	20	20	20	20	20
Maximum slope availability	°	6	6	6	6	6
Number of hydraulic circuits / pressure	bar			1 / 200		1 / 200
Number of hydro-couples / type				2 / ISO 12,5		2 / ISO 12,5
Tractor hitch requirement		TBZ cat. 3	TBZ cat. 3	TBZ cat. 3	TBZ cat. 3	TBZ cat. 3
Machine weight ²	kg	1 680	1 920	2 655	2 650	3 010

¹ Recommended towing vehicle, the actual pulling force may significantly change according to the tilling depth, soil conditions, inclination of land, wear of working units and their adjustment.
² Machine weight with double roller.
³ Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

N - mounted machine
NS - mounted foldable machine

Optional

Photo gallery

Video

Files

User manual

Tine cultivator Triolent

Accessories

Rollers

Crosskill roller CR

Diameter	400 mm
Weight	180 kg/m

Disc roller SDR

Diameter	580 mm
Weight	220 kg/m

Double roller DR

Diameter	400/300 mm
Weight	135 kg/m

LTX roller

Diameter	586 mm
Weight	200 kg/m

Ring roller RR

Diameter	520 mm
Weight	160 kg/m

Tube roller TRS

Diameter	600 mm
Weight	100 kg/m

V roller VR

Diameter	600 mm
Weight	175 kg/m

Proper selection of the type of the rear roller contributing significantly to the final quality of the tillage is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.

Roller	Tube-shaped TRS	Double DR	Ring RR	LTX
Crumbling	●●○○	●●●○	●●●○	●●○○
Stamping	●●●○	●●●○	●●●●	●●●●
Depth guiding	●●●○	●●●●	●●●●	●●●●
Resistance against clogging	●○○○	●●●○	●●●●	●●●○
Suitability for stony soils	●●●○	●●●○	●●●○	●●●○
Suitability for wet soils	●○○○	●●○○	●●●●	●●●●
Heavy soils	●●○○	●●●●	●●●●	●●●●
Medium soils	●●●○	●●●●	●●●●	●●●●
Light soils	●●●●	●●●●	●●●●	●●●○

Roller	Disk SDR	Crosskill CR	VR
Crumbling	●●●○	●●●●	●●●○
Stamping	●●●●	●●●●	●●●●
Depth guiding	●●●●	●○○○	●●●●
Resistance against clogging	●●●○	●●○○	●●●●
Suitability for stony soils	●●●○	●●○○	●●●○
Suitability for wet soils	●●●●	●●○○	●●●●
Heavy soils	●●●●	●●●●	●●●●
Medium soils	●●●●	●●●○	●●●●
Light soils	●●●○	●●○○	●●●●

Chisels

Chisel 75 CARBIDE

Chisel width	75 mm
Chisel thickness	15 mm
Chisel body hardness	up to 55 HRC
Widia plate hardness	up to 92 HRA
Chisel service life	+ 100-200 %

Chisel 75 MULTICARBIDE

Share width	75 mm
Share body hardness	up to 55 HRC
Widia plate hardness	up to 92 HRA
Share service life	+ 150-400 %

Chisel 75 MULTICARBIDE PRO

Share width	75 mm
Share body hardness	up to 55 HRC
Widia plate hardness	up to 92 HRA
Share service life	+ 200-500 %

Chisel 40 CARBIDE

Chisel width	40 mm
Chisel thickness	25 mm
Chisel body hardness	up to 55 HRC
Widia plate hardness	up to 92 HRA
Chisel service life	+ 100-200 %
Diesel fuel consumption	- 10 %