Sowing unit for sowing of catch crops – Micro drill

30. 3. 2016
Micro drill is a sowing unit designed for sowing of catch crops or for direct sowing of grasses. The sowing unit can be mounted on different types of Farmet machines with the working span from 2.1 to 12 metres depending on the used type of fan. The fan type is always selected according to machine span in combination with the planned type of the seed that will be used predominantly. The hopper with volume of 200 litres easily accessible thanks to the smart design.
Sowing unit for sowing of catch crops  – Micro drill

Micro drill is a sowing unit designed for sowing of catch crops or for direct sowing of grasses. The sowing unit can be mounted on different types of Farmet machines with the working span from 2.1 to 12 metres depending on the used type of fan. The fan type is always selected according to machine span in combination with the planned type of the seed that will be used predominantly. The hopper with volume of 200 litres easily accessible thanks to the smart design.

The sowing unit Micro drill can be used for Farmet machines

  • Disk plough-harrows Diskomat and Softer
  • Share cultivators Fantom (NS)
  • Chisel cultivators Triolent, Duolent

Micro drillGreatest benefits of the sowing unit Micro drill:

  • Combination of working procedures
  • Sowing of catch crops and grasses
  • Limitation of soil erosion
  • Increase of nitrogen in soil
  • Limitation of weed growing
  • Precise cross distribution through the whole working width
  • Counter of hectars and automatic function of the calibration test
  • Dose of the seed can be changed while the vehicle is in motion

Determination of the fan type

Working width of the machine Type of the sowing unit
 2,1 - 6 metres with double electric fan, 8 outputs
 2,1 - 7 metres with hydraulic fan, 8 outputs (optional)
 7 - 12 metres with hydraulic fan, 16 outputs (optional)

 

Dosage of seeds

The seed is dosed using the sowing shaft located directly under the hopper. Prior to filling the hopper with the seed, a proper sowing shaft must be selected (coarse, fine). The proper selection is performed according to the seed properties and according to the delivered amount. The standard equipment of the machine includes two types of rollers – for fine seed (mustard, buckwheat) and for coarse seed (cereals, grass).

Micro drill
Fine seedmustard, buckwheat
Micro drill
Coarse seedcereals, grass

Control unit

The sowing unit is controlled by the control unit 5.2 which is provided in the standard equipment. The control module is fully adapted to additional accessories of the machine – optional sensory equipment.

Functions of the control unitMicro drill

  • Electronic volume control (possible even during operation)
  • Function of automatic calibration test
  • Counter of total treated hectares and counter of hectares a day
  • Optional language selection
  • Calibration test and display in kg/ha and cereals / m2
  • Speed regulation
  • Use with various speed sensors (optional)
  • Optional calibration with the button
  • Optional regulation of electric fan

Supply extent

  • Electronic control module 5.2
  • Sowing device with the hopper of the volume of 200 litres
  • Dosing rollers for both fine and coarse seed
  • Load bearing structure
  • Complete connection cables
Turite klausimų? Susisiekite su mumis.