Disc cultivator Softer PRO

 

Technology

1 Preliminary preparation zone
a) Flexi-cut - cutting crop residue
b) Flexi-board - levelling soil surface
2 Full-area loosening zone. The double-row disc section with aggressive geometry ensures perfect full-area undercut to depth of 3,5–13 cm with intensive mixing of plant residues. The disc section also spreading well plant residues over the area.
3 Clod crumbling and soil reconsolidation zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise.

High performance and quality of work

  • High working speed up to 15 km/h.
  • Symmetrically arranged two rows of serrated discs for reliable soil penetration, levelling and intense mixing.
  • Working angle of the disks and pressure to each disk ensure uncompromising penetration even to heavy and over-dried soils and perfect undercut of the processed profile.
  • High quality rubber mounting for optimal working angles of the disk.
  • Precise deep guiding with optimum soil compaction.

Technics

Disc cultivator Softer PRO

  1. Possibility to install front tools: Flexi-cut for effective crop residue cutting or Flexi-board for levelling surface, crumbling clods.
  2. Discs with Ø 530 mm, symmetrically arranged in two rows, undercut the soil. The working depth is 3.5–13 cm.
  3. Clods are crumbled by the rear roller.

Discs with Full Circumference Edge

Disks with the diameter of 530 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.

The discs penetrate the soil perfectly and also cut crop residue.

The disks are placed in maintenance-free bearings with excellent service life. Optimum geometry of disks ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The disks retain ideal working angle even with partially worn geometry of disks. The disk spacing of 24 cm ensures good free flow of plant residues.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

  • maintenance-free placement of the disks
  • maintenance-free rubber mounting
Massive transport axle with brakes
Controlled from the tractor cabin.
Maintenance free bearings SKF
Maintenance-free placement of the disks ensuring operation of the machine with no need of additional lubrication.
Maintenance-free rubber mounting
Resistant and maintenance-free rubber mounting for adaptation to terrain with protection against overload.
One disc - one tine
The individual placement of each disc on a separate tine allows for higher pressure and better penetration into the soil, eliminates clogging and does not transmit shocks to the bearings of adjacent discs.

Easy operation

Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.

  • Minimum of adjustment points.
  • Minimum of lubrication points.
Hydraulic depth adjustment
The working depth of the discs can be conveniently adjusted hydraulically directly from the tractor cabin.
Safe Machine Control
Intuitive settings and operation.
Easy Side Deflector Settings
Precise pass follow-up.
Flexi-cut / Flexi-board Hydraulic Control
Controlled from the tractor cabin, may be changed during operation.

Smartly performed designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.

  • Skilful when working in the field due to a short compact design.
  • Light construction of the machine with no need of weighing down results in low operating costs.
  • Very good self-cleaning capabilities of the space between the disk and the tine.
Aggressive Disc Angle
Ensures full-area undercutting at any working depth.
Full-perimeter disc edges
Easier disc soil penetration.
Transport Position
A unique folding system enabling the machine with the working span up to 12,35 m to be folded to the transport width of 3 m and height of 4 m and thus complies with the regulations for operation of vehicles on the road network.
Symmetrical arrangement of discs
The symmetrical arrangement of the discs eliminates lateral forces transmitted to the tractor.
Automatic Side Frame Pressure
Side frames with hydraulic pressure perfectly follow uneven terrain.
Depth Gauge
Easy to read during work from the tractor cabin.
Front working tools
Front working tools can be fixed in front of the work discs. Choose between Flexicut cutting rollers or Flexiboard front levelling bar.
High machine throughput
Hook tines increase the machine throughput.
Flipping transport axle
The flipping transport axle increases the pressure of the cultivating discs.
Rollers in one row
Rollers in one row ensure even soil compaction even in the corners and edges of the field and the possibility of fast turning on the headlands directly on the rollers.
Stable when crossing road
The rigid solid construction of the main frame and axle makes the machine very stable during transport. Pneumatic twin-hose brakes ensure a high degree of safety for fast efficient road transport.

Parameters

Technical parameters Units Softer 500 PRO  Softer 600 PRO Softer 700 PRO Softer 800 PRO
Working width mm 4 930 5 900 6 850 7 560
Transport width mm 3 000 3 000 3 000 3 000
Transport height mm 2 700 3 180 3 660 4 000
Total machine length mm 7 300 7 300 7 300 7 300
Working depth mm 35–130 35–130 35–130 35–130
Number of discs – front row
Number of discs – rear row
pcs 21
20
25
24
29
28
32
31
Diameter of discs mm 530 530 530 530
Working performance ha/h 4,9–7,4 5,9–8,9 6,9–10,3 7,6–11,3
Towing vehicle 1 kW
HP
130–190
175–255
150–225
200–300
175–260
240–360
200–300
270–405
Working speed km/h 10–15 10–15 10–15 10–15
Maximum transport speed 4 km/h 30 30 30 30
Maximum slope availability ° 6 6 6 6
Dimension of tyre - transport   19.0/45–17 14 PR 19.0/45–17 14 PR 19.0/45–17 14 PR 19.0/45–17 14 PR
Brake type / distribution 4   air / two-line air / two-line air / two-line air / two-line
Required pressure kPa 8,5 8,5 8,5 8,5
Number of hydraulic circuits / pressure 3 bar 3–6 / 200 3–6 / 200 3–6 / 200 3–6 / 200
Number of hydro-couples / type 3   6–12 / ISO 12,5 6–12 / ISO 12,5 6–12 / ISO 12,5 6–12 / ISO 12,5
Tractor hitch requirement   TBZ cat. 3; bottom hitch K80; lug Ø 50, 70 mm
Machine weigh 2 kg 5 600 6 400 7 300 8 200
Technical parameters Units Softer 1050 PRO   Softer 1250 PRO
Working width mm 10 400 12 350
Transport width mm 3 000 3 000
Transport height mm 3 850  4 000
Total machine length mm 7 900 7 900
Working depth mm 35–130 35–130
Number of disks – front row
Number of disks – rear row
pcs 44
45
52
53
Diameter of disks mm 530 530
Working performance ha/h 10,5–16 12–18
Towing vehicle 1 kW
HP
265–400
355–535
305–465
410–625
Working speed km/h 10–15 10–15
Maximum transport speed 4 km/h 30 30
Maximum slope availability ° 6  6
Dimension of tyre - transport   550/45-22,5 550/45-22,5
Brake type / distribution 4   air / two-line air / two-line 
Required pressure kPa 8,5  8,5
Number of hydraulic circuits / pressure bar 4 (6) / 200 4 (6) / 200
Number of hydrocouples / type   6 / ISO 12,5  6 / ISO 12,5
Tractor hitch requirement   TBZ cat. 3; bottom hitch K80; lug Ø 50, 70 mm
Machine weight 2 kg 13 000 13 800


1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with LTX roller.
3 According to the machine equipment.
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

Optional

Photo gallery

Video

Files

Priedai

Rollers

Disk roller SDR
Diameter 580 mm
Weight 220 kg/m
Double ring roller DRR
Diameter 540/540 mm
Weight 195 kg/m
Double V-ring DVR
Diameter 600/600 mm
Weight 190 kg/m
Double roller DR
Diameter 400/350 mm
Weight 180 kg/m
LTX roller
Diameter 586 mm
Weight 200 kg/m
Tube roller TRS
Diameter 600 mm
Weight 100 kg/m
V roller VR
Diameter 600 mm
Weight 175 kg/m

Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.

Roller Tube-shaped
TRS
Double
DR
Double ring
DRR
LTX
Crumbling ●●○○ ●●●○ ●●●○ ●●○○
Stamping  ●●●○ ●●●○ ●●●● ●●●●
Depth guiding  ●●●○ ●●●● ●●●● ●●●●
Resistance against clogging ●○○○ ●●●○ ●●●● ●●●○
Suitability for stony soils ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●○○ ●●●● ●●●●
Heavy soils ●●○○ ●●●● ●●●● ●●●●
Medium soils  ●●●○ ●●●● ●●●● ●●●●
Light soils ●●●● ●●●● ●●●● ●●●○
Roller Disk
SDR
VR Double V-ring
DVR
Crumbling  ●●●○  ●●●○  ●●●○
Stamping ●●●● ●●●● ●●●●
Depth guiding ●●●● ●●●● ●●●●
Resistance against clogging  ●●●○ ●●●● ●●●●
Suitability for stony soils  ●●●○  ●●●○  ●●●○
Suitability for wet soils ●●●● ●●●● ●●●●
Heavy soils ●●●● ●●●● ●●●●
Medium soils ●●●● ●●●● ●●●●
Light soils  ●●●○ ●●●● ●●●●

Flexi-board
Flexi-cut

TPH category 3

The pins for TPH category 4 can be exchanged.

Hinge K80 Ø 80 mm
Loop for the lower hinge Ø 50 mm, Ø 70 mm

Hydrotronic – Electro-Hydraulic Circuit Divider

Divides 1 tractor circuit into 3 circuits.