SOFTER PS

Loosening up to 12 cm with full-area undercut and mixing

Technology

Disc cultivator Softer PS

1	Full-area loosening zone. The double-row disc section with aggressive geometry ensures perfect full-area undercut to depth of 3,5–12 cm with intensive mixing of plant residues. The disc section also spreading well plant residues over the area.
2	Clod crumbling and soil reconsolidation zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise.

High performance and quality of work

High working speed up to 15 km/h.
Gear disks for safe penetration into the soil and intensive mixing.
Working angle of the disks and pressure to each disk ensure uncompromising penetration even to heavy and over-dried soils and perfect undercut of the processed profile.
High quality rubber mounting for optimal working angles of the disk.
Precise deep guiding with optimum soil compaction.

Technics

Disc cultivator Softer PS

Disks Ø 510 mm / Ø 560 mm located in two rows will undercut the soil. Working depth is 3,5–12 cm.
Clods are crumbled by the rear roller.

Disc cultivator Softer PS

Disks Ø 510 mm / Ø 560 mm located in two rows will undercut the soil. Working depth is 3,5–12 cm.
Clods are crumbled by the rear roller.

Disks with dentate circumference

Disks with the diameter of 510 mm / 560 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.

The disks are placed in maintenance-free bearings with excellent service life. Optimum geometry of disks ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The disks retain ideal working angle even with partially worn geometry of disks. The disk spacing of 24 cm ensures good free flow of plant residues.

Disks with the diameter of 510 mm / 560 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

maintenance-free placement of the disks
maintenance-free rubber mounting

High-strength materials

High-strength refined materials used for crucial nodes to ensure long service life. Strongly dimensioned frame of high-strength steels.

Maintenance free bearings

Maintenance-free placement of the disks ensuring operation of the machine with no need of additional lubrication.

Maintenance-free rubber mounting

Resistant and maintenance-free rubber mounting for adaptation to terrain with protection against overload.

Easy operation

Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.

Minimum of adjustment points.
Minimum of lubrication points.
No angles adjustments or translation of disks are needed.

Continuous connection of runs

The extreme disk is separately height-adjustable which allows continuous connection of runs.

Direction of the processed soil

The height and longitudinally adjustable side deflector for ideal direction of the processed soil.

Adjustment of working depth

Easy adjustment of the working depth according to the overview table using the distance washers on the roller piston rods.

Smartly performed designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.

Skilful when working in the field due to a short compact design.
Light construction of the machine with no need of weighing down results in low operating costs.
Very good self-cleaning capabilities of the space between the disc and the tine.

Full-perimeter disc edges

Easier disc soil penetration.

Permanent pressure of the side frames

Automatic terrain tracing and permanent pressure of the side frames in Softer 8 and Softer 11 PS due to compensating accumulation vessel.

Micro Drill Seeding Unit

The sophisticated design of the machine allows for an installation of the Micro Drill Seeding Unit for sowing catch crop or for planting grass directly.

More information about Micro Drill >

Parameters

Technical parameters	Units	Softer 4 P	Softer 4,5 PS	Softer 5 PS	Softer 6 PS
Working width	mm	3 990	4 470	4 950	5 910
Transport width	mm	4 330	3 000	3 000	3 000
Transport height	mm	1 600	2 650	2 900	3 370
Total machine length	mm	6 675	6 675	6 675	6 675
Working depth	mm	35─120	35─120	35─120	35─120
Number of disks – front row Number of disks – rear row	pcs	17 16	19 18	21 20	25 24
Diameter of disks	mm	510 / 560	510 / 560	510 / 560	510 / 560
Working performance	ha/h	4─6	4,5─6,8	5─7,5	6─9
Towing vehicle ¹	kW HP	110─160 150─215	120─180 160─240	130─190 175─255	150─225 200─300
Working speed	km/h	10─15	10─15	10─15	10─15
Maximum transport speed ⁵	km/h	20	20	20	20
Maximum slope availability	°	6	6	6	6
Dimension of tyre - transport		400/60-15,5	400/60-15,5	400/60-15,5	400/60-15,5
Brake type / distribution ^{4, 5}
Required pressure ⁴	kPa
Number of hydraulic circuits / pressure ³	bar	2 (3) / 200	3 (4) / 200	3 (4) / 200	3 (4) / 200
Number of hydrocouples / type ³		4 (6) / ISO 12,5	6 (8) / ISO 12,5	6 (8) / ISO 12,5	6 (8) / ISO 12,5
Tractor hitch requirement		TBZ cat. 3	TBZ cat. 3	TBZ cat. 3	TBZ cat. 3
Machine weight ²	kg	3 600	4 000	4 350	4 990

Technical parameters	Units	Softer 8 PS	Softer 9 PS W	Softer 11 PS ⁶	Softer 12 PS W ⁶
Working width	mm	7 360	8 320	10 690	11 670
Transport width	mm	3 000	4 000	3 000	4 000
Transport height	mm	4 000	4 000	4 000	4 000
Total machine length	mm	6 850	6 850	6 850	6 850
Working depth	mm	35─120	35─120	35─120	35─120
Number of disks – front row Number of disks – rear row	pcs	31 30	35 34	45 44	49 48
Diameter of disks	mm	510 / 560	510 / 560	510 / 560	510 / 560
Working performance	ha/h	8─12	9─13,5	11─16,5	12─18,1
Towing vehicle ¹	kW HP	200─300 270─405	220─320 295─430	245─370 330─495	280─410 380─550
Working speed	km/h	10─15	10─15	10─15	10─15
Maximum transport speed ⁵	km/h	20	20	20	20
Maximum slope availability	°	6	6	6	6
Dimension of tyre - transport		500/50-17	520/50-17	500/50-17	520/50-17
Brake type / distribution ^{4, 5}		air / two-line	air / two-line	air / two-line	air / two-line
Required pressure ⁴	kPa	8,5	8,5	8,5	8,5
Number of hydraulic circuits / pressure ³	bar	3 (4) / 200	3 (4) / 200	3 (4) / 200	3 (4) / 200
Number of hydrocouples / type ³		6 (8) / ISO 12,5	6 (8) / ISO 12,5	6 (8) / ISO 12,5 ³	6 (8) / ISO 12,5
Tractor hitch requirement		TBZ cat. 3	TBZ cat. 3	TBZ cat. 3	TBZ cat. 3
Machine weight ²	kg	6 700	7 600	9 200	10 920

¹ Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
² Machine weight with the heaviest roller.
³ An additional hydraulically controlled supporting leg for the version of the machine with a drawbar attached to the fixed bottom hitch.
⁴ Alternative of the brake type: hydraulic, pressure 130 ± 5 bar (designed for the French market).
⁵ Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
⁶ When selecting the rollers of disk plough-harrow Softer 11 PS, Softer 12 PS W, first contact the sales representative of the company Farmet a. s.

PS – half mounted foldable machine
P FIX – semi-mounted not-folding machine, transport width more than 3 metres
PS W – semi-mounted folding machine, transport width more than 3 metres

Optional

Photo gallery

Video

Soubory

User manual

Disc cultivator Softer

Disc cultivator Softer 11 PS

Disc cultivator Softer 4,5 PS

Disc cultivator Softer 5 PS

Disc cultivator Softer 6 PS

Disc cultivator Softer 8 PS

Priedai

Rollers

Disk roller SDR

Diameter	580 mm
Weight	220 kg/m

Double ring roller DRR

Diameter	540/540 mm
Weight	195 kg/m

Double ring roller cannot be used for Softer 11 PS, Softer 12 PS W.

Double roller DR

Diameter	400/350 mm
Weight	180 kg/m

LTX roller

Diameter	586 mm
Weight	200 kg/m

Tube roller TRS

Diameter	600 mm
Weight	100 kg/m

V roller VR

Diameter	600 mm
Weight	175 kg/m

Double FLAT roller DFR

Diameter	520/520 mm
Weight	165 kg/m

Double FLAT roller cannot be used for Softer 11 PS, Softer 12 PS W.

Double V-ring DVR

Diameter	550/550 mm
Weight	180 kg/m

Double V-ring cannot be used for Softer 11 PS, Softer 12 PS W.

Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.

Roller	Tube-shaped TRS	Double DR	Double ring DRR	Double DFR
Crumbling	●●○○	●●●○	●●●○	●●●○
Stamping	●●●○	●●●○	●●●●	●●●●
Depth guiding	●●●○	●●●●	●●●●	●●●●
Resistance against clogging	●○○○	●●●○	●●●●	●●●●
Suitability for stony soils	●●●○	●●●○	●●●○	●●●○
Suitability for wet soils	●○○○	●●○○	●●●●	●●●●
Heavy soils	●●○○	●●●●	●●●●	●●●●
Medium soils	●●●○	●●●●	●●●●	●●●●
Light soils	●●●●	●●●●	●●●●	●●●●

Roller	LTX	Disk SDR	VR	Double V-ring DVR
Crumbling	●●○○	●●●○	●●●○	●●●○
Stamping	●●●●	●●●●	●●●●	●●●●
Depth guiding	●●●●	●●●●	●●●●	●●●●
Resistance against clogging	●●●○	●●●○	●●●●	●●●●
Suitability for stony soils	●●●○	●●●○	●●●○	●●●○
Suitability for wet soils	●●●●	●●●●	●●●●	●●●●
Heavy soils	●●●●	●●●●	●●●●	●●●●
Medium soils	●●●●	●●●●	●●●●	●●●●
Light soils	●●●○	●●●○	●●●●	●●●●