|1||Full-area loosening zone. The double-row disc section with aggressive geometry ensures perfect full-area undercut to depth of 4–12 cm with intensive mixing of plant residues. The disc section also spreading well plant residues over the area.|
|2||Loosening zone. The loosening depth has a wide range of 10–35 cm. Full-area undercut wings can be used for loosening from 6 to 20 cm. Loosening chisels with optimized geometry in two rows ensure deep zone loosening to increase water infiltration.|
|3||Wave-levelling zone. Levelling discs also increase the effect of incorporating plant residues.|
|4||Clod crumbling and soil compaction zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise.|
High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.
Thanks to the minimum number of points of adjustment and lubrication, both operation and maintenance are a very simple task that anyone can do.
|Technical parameters||Units||Triton 450 PS||Triton 600 PS|
|Working width||mm||4 500||6 000|
|Transport width||mm||3 000||3 000|
|Transport height||mm||3 340||4 000|
|Total machine length||mm||10 000||10 000|
|Working depth||mm||100 - 350||100 - 350|
|Number of ploughshares||pcs||11||15|
|Number of discs||pcs||38||42|
|Disc diameter||mm||510 / 560||510 / 560|
|Distance between ploughshares||mm||420||420|
|Number of ploughshare rows||pcs||2||2|
|Pitch of rows||mm||840||840|
|Number of disc rows||pcs||2||2|
|Release force of ploughshares||kg||450||450|
|Diameter of levelling discs||mm||460||460|
|Working performance||ha/h||3,6 - 5,4||4,8 - 7,2|
|Towing vehicle 1||kW
|225 - 350
300 - 450
|350 - 460
450 - 600
|Working speed||km/h||8 - 12||8 - 12|
|Maximum transport speed 4||km/h||20||20|
|Maximum slope availability||°||6||6|
|Dimensions of tyre – transport||19.0/45-17||19.0/45-17|
|Brake type / distribution 3||air / two-line||air / two-line|
|Required pressure 3||kPa||5,5||5,5|
|Number of hydraulic circuits / pressure||bar||5 / 200||5 / 200|
|Number of hydro-couples / type||10 / ISO 12,5||10 / ISO 12,5|
|Tractor hitch requirement||bottom hitch K80; lug Ø 50, 70 mm|
|Machine weight 2||kg||7 200||8 800|
1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with the LTX roller.
3 Alternative to hydraulic brake / operating pressure of 130 ± 5 bar
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
PS - half-carried foldable machine
Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.
|Resistance against clogging||●○○○||●●●●||●●●○||●●●○|
|Suitability for stony soils||●●●○||●●●○||●●●○||●●●○|
|Suitability for wet soils||●○○○||●●●●||●●●●||●●●●|
|Resistance against clogging||●●●●||●●●●|
|Suitability for stony soils||●●●○||●●●○|
|Suitability for wet soils||●●●●||●●●●|