Do you like this machine? Write to us.
I am interested in the machine

 

1 Preliminary preparation zone
a) Flexicut - cutting crop residue
b) Flexiboard - levelling soil surface
2 Full-area loosening zone. The double-row disc section with aggressive geometry ensures perfect full-area undercut to depth of 3,5–12 cm with intensive mixing of plant residues. The disc section also spreading well plant residues over the area.
3 Clod crumbling and soil reconsolidation zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise.

High performance and quality of work

  • High working speed up to 15 km/h.
  • Symmetrically arranged two rows of serrated discs for reliable soil penetration, levelling and intense mixing.
  • Working angle of the disks and pressure to each disk ensure uncompromising penetration even to heavy and over-dried soils and perfect undercut of the processed profile.
  • High quality rubber mounting for optimal working angles of the disk.
  • Precise deep guiding with optimum soil compaction.

Disk plough-harrow Softer PRO

  1. Possibility to install front tools: Flexicut for effective crop residue cutting or Flexiboard for levelling surface, crumbling clods.
  2. Discs with Ø 510 mm, symmetrically arranged in two rows, undercut the soil. The working depth is 3.5-12 cm.
  3. Clods are crumbled by the rear roller.

Discs with Full Circumference Edge

Disks with the diameter of 510 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.

The discs penetrate the soil perfectly and also cut crop residue.

The disks are placed in maintenance-free bearings with excellent service life. Optimum geometry of disks ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The disks retain ideal working angle even with partially worn geometry of disks. The disk spacing of 24 cm ensures good free flow of plant residues.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

  • maintenance-free placement of the disks
  • maintenance-free rubber mounting
Integrated Transport Axle
Controlled from the tractor cabin.
Maintenance-free placement of disks
Maintenance-free placement of the disks ensuring operation of the machine with no need of additional lubrication.
Maintenance-free rubber mounting
Resistant and maintenance-free rubber mounting for adaptation to terrain with protection against overload.
Individual Mounting of Each Disc
Quality soil levelling, high protection of the working parts, high throughput of the crop residue.

Easy operation

Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.

  • Minimum of adjustment points.
  • Minimum of lubrication points.
Hydraulic Disc Lowering and Depth Setting
Simple hydraulic setting of the working depth from the tractor cabin, the working depth can be changed during the operation.
Safe Machine Control
Intuitive settings and operation.
Easy Side Deflector Settings
Precise pass follow-up.
Flexicut / Flexiboard Hydraulic Control
Controlled from the tractor cabin, may be changed during operation.

Smartly performed designed machine

The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.

  • Skilful when working in the field due to a short compact design.
  • Light construction of the machine with no need of weighing down results in low operating costs.
  • Very good self-cleaning capabilities of the space between the disk and the plate for fixing the disk.
Skilful when turning in the field
The Softer PRO is equipped with an integrated axle. Easy turning on the transport wheels at headlands.
Aggressive Disc Angle
Ensures full-area undercutting at any working depth.
Full-perimeter disc edges
Easier disc soil penetration.
Transport Position
A unique folding system enabling the machine with the working span up to 12,25 m to be folded to the transport width of 3 m and height of 4 m and thus complies with the regulations for operation of vehicles on the road network.
Symmetric Disc Spacing
Even soil levelling and processing.
Hook-Shaped Tines
Provide high soil and crop residue throughput high clearance - a self-cleaning effect.
Automatic Side Frame Pressure
Even soil processing and levelling, terrain tracing.
Controlled Traffic Farming
Width 10.25 m / 12.25 m: also to be used in the CTF technology.
Depth Gauge
Easy to read during work from the tractor cabin.

Technical parameters

Technical parameters Units Softer
1050 PRO
  Softer
1250 PRO
Working width mm 10 250 12 250
Transport width mm 3 000 3 000
Transport height mm 3 500  4 000
Total machine length mm 8 150 8 150
Working depth mm 35–120 35–120
Number of disks – front row
Number of disks – rear row
pcs 42
42
50
50
Diameter of disks mm 510 510
Working performance ha/h 10,2–15 12,2–18,4
Towing vehicle 1 kW
HP
225–375
300–500
260–440
400–600
Working speed km/h 10–15 10–15
Maximum transport speed 3 km/h 30 30
Maximum slope availability ° 6  6
Dimension of tyre - transport   520/50-17 520/50-17
Brake type / distribution 3   air / two-line air / two-line 
Required pressure kPa 8,5  8,5
Number of hydraulic circuits / pressure bar 4 (6) / 200 4 (6) / 200
Number of hydrocouples / type   6 / ISO 12,5  6 / ISO 12,5
Tractor hitch requirement   TBZ cat. 3; bottom hitch K80; lug Ø 50, 70 mm
Machine weight 2 kg ~ 11 000 ~ 13 000


1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with LTX roller.
3 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

Accessories

Rollers

Disk roller
Diameter 580 mm
Weight 220 kg/m
Double ring roller
Diameter 540/540 mm
Weight 195 kg/m
Double roller
Diameter 400/350 mm
Weight 120 kg/m
LTX roller
Diameter 586 mm
Weight 200 kg/m
Tube roller
Diameter 600 mm
Weight 90 kg/m
Double V-ring
Diameter 600/600 mm
Weight 165 kg/m
V roller
Diameter 600 mm
Weight 175 kg/m
Double FLAT roller
Diameter 520/520 mm
Weight 165 kg/m

Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.

Roller Tube-shaped
TRS
Double
DR
Double ring
DRR
Double
DFR
Crumbling ●●○○ ●●●○ ●●●○ ●●●○
Stamping ●●●○ ●●●○ ●●●● ●●●●
Depth guiding ●●●○ ●●●● ●●●● ●●●●
Resistance against clogging ●○○○ ●●●○ ●●●● ●●●●
Suitability for stony soils ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●○○ ●●●● ●●●●
Heavy soils ●●○○ ●●●● ●●●● ●●●●
Medium soils ●●●○ ●●●● ●●●●  ●●●●
Light soils ●●●● ●●●● ●●●●  ●●●●

 

Roller LTX Disk
SDR
VR Double V-ring
DVR
Crumbling ●●○○  ●●●○ ●●●○ ●●●○
Stamping ●●●● ●●●● ●●●● ●●●●
Depth guiding ●●●● ●●●● ●●●● ●●●●
Resistance against clogging ●●●○ ●●●○ ●●●● ●●●●
Suitability for stony soils ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●●●● ●●●● ●●●● ●●●●
Heavy soils ●●●● ●●●● ●●●● ●●●●
Medium soils ●●●● ●●●● ●●●● ●●●●
Light soils ●●●○ ●●●○ ●●●● ●●●●

Flexiboard
Flexicut

Variants of hinges

TPH category 3

The pins for TPH category 4 can be exchanged.

Hinge K80 Ø 80 mm
Loop for the lower hinge Ø 50 mm, Ø 70 mm

Optional equipment

Two-line single-circuit air brakes
Hydrotronic – Electro-Hydraulic Circuit Divider

Divides 1 tractor circuit into 3 circuits with electronic control.

Extended Tracing Depth Wheels

For combination with preliminary cultivation with Flexicut / Flexiboard.