Do you like this machine? Write to us.
Mám zájem o stroj

1

Zone of pre-consolidation of soil and crumbling clods. The front tire roller effectively packs the soil and crumbs large clods.

2

Seed and fertilizer storage zone in one operation. Seed and fertilizer are stored by special seeding coulters. The coulters ensure that the seedbed is created and the seed is placed in strips with a spacing of approx. 12 cm. At the same time the seeding coulters put the granulated fertilizer into the root zone of future plants always between two strips of seed.  

3

Ridge levelling zone and seed cover behind the seeding coulters. Harrow with special double fingers effectively levels the soil surface behind the shares.

4

Zone of final soil compaction and pressing seed. Large flotation tires ensure a very gentle and even final soil compaction and induce seed creasing.

5

Zone of final levelling of soil surface and spreading of plant residues. The double row harrow very effectively levels the soil surface and spreading plant residues.

Falcon PRO Tandem Share Seed Drill

1 2 3 4
5

 

  1. Front rubber-tyre roller.
  2. Seeding with additional fertilisation.
  3. Levelling bar for surface levelling.
  4. Rear rubber-tyre roller.
  5. Levelling bar for surface levelling.

The Falcon PRO Tandem seed drill uses the modular foundation of Falcon PRO, equipped with the front seeding section with a tyre packer and three rows of special seeding shares. The seeding shares are followed by an effective levelling system, excellent for levelling out the soil surface and for even distribution of crop residue.

The rear roller equipped with large low-pressure tyres provides very low pressure on the soil, even when the seed and fertilizer hoppers are completely full. The robust tyres are highly resistant to penetration and they allow for transport of the machine on low quality roads at high speed, even for greater distances.

The special seeding shares with tandem-configured outputs for seeding and parallel placement of fertilizer into the root zone provide quality seeding, even under the conditions of a high quantity of crop residue in mulch seeding technologies. The precise depth guidance by tyre rollers helps achieve seeding depth precision comparable with disc seed drills.

The robust frame of the machine makes it also suitable for rocky soils.

The Falcon PRO Tandem seed drill uses the modular foundation of Falcon PRO, equipped with the front seeding section with a tyre packer and three rows of special seeding shares. The seeding shares are followed by an effective levelling system, excellent for levelling out the soil surface and for even distribution of crop residue.

The rear roller equipped with large low-pressure tyres provides very low pressure on the soil, even when the seed and fertilizer hoppers are completely full. The robust tyres are highly resistant to penetration and they allow for transport of the machine on low quality roads at high speed, even for greater distances.

The special seeding shares with tandem-configured outputs for seeding and parallel placement of fertilizer into the root zone provide quality seeding, even under the conditions of a high quantity of crop residue in mulch seeding technologies. The precise depth guidance by tyre rollers helps achieve seeding depth precision comparable with disc seed drills.

The robust frame of the machine makes it also suitable for rocky soils.

High performance and quality of work

  • Short downtime for filling hoppers thanks to the large capacity.
  • Fast turns at the headland thanks to the short compact frame.
  • Low pulling resistance thanks to the low weight and special shares.
  • System using the front and rear rollers for depth guidance and excellent tracing. Perfect levelling, compaction and soil cultivation in a single pass.

High performance and quality of work

  • Short downtime for filling hoppers thanks to the large capacity.
  • Fast turns at the headland thanks to the short compact frame.
  • Low pulling resistance thanks to the low weight and special shares.
  • System using the front and rear rollers for depth guidance and excellent tracing. Perfect levelling, compaction and soil cultivation in a single pass.

Robust design

High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.

Machine operation without lubrication
Maintenance-free bearing of all working parts providing for machine operation without the need of lubrication.
Tyres resistant to penetration and wear and tear
Large transport low-pressure radial tyres resistant to penetration and wear.

Technical parameters

Technical parameters Units Falcon 6 PRO Tandem
Working width mm 6 000
Transport width mm 3 000
Transport height mm 3 300
Total machine length mm 9 000
Working depth mm 0 - 100
Hopper capacity without fertilization l 4 000
Hopper capacity with fertilization
(ratio 40:60)
l 6 000
Hopper filling height mm 2 650
Dimensions of the filling opening
without fertilization / with fertilization
m  2 x 0,52 /
1,2 x 0,52
Number of sowing shares ks 24
Working performance ha/h 4 - 6
Towing vehicle 1 kW
HP
147
200
Working speed km/h 10 – 20
Maximum transport speed 4 km/h 25
Maximum slope availability ° 6
Dimensions of tyre – transport   405/70-20
Brake type / distribution 3, 4   air / two-line
Required pressure 3 kPa 8,5
Number of hydraulic circuits / pressure bar 4 / 200
Number of hydro-couples / type   6 / ISO 12,5
Non-pressure return line (max. 5 bar)   1 / ISO 20
Oil flow of hydraulic fan l/min 30 - 40
Oil flow for machine control l/min 50 - 60
Electric system requirement   12 V DC / 40 A
Tractor hitch requirement   TBZ cat. 3
Machine weight 2 kg 6 500 - 7 500


1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight according to the equipment.
3 Alternative to hydraulic brake / operating pressure of 130 ± 5 bar.
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

Accessories

Display Units

BASIC-Terminal
Equipment  
Display Dimensions 5,7" 
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Rail Line Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 1
Camera Input x
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

COMFORT-Terminal
Equipment  
Display Dimensions 10,4"
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Rail Line Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 1
Camera Input x
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

TOUCH800®
Equipment  
Display Dimensions 8"
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Rail Line Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 2
Camera Input OK
GSM Modem x

Müller Elektronik: ISOBUS DRILL-Controller

TOUCH1200®
Equipment  
Display Dimensions 12,1"
ISO-BUS OK
Seed Passing Sensor Control OK
Hopper Level Reading OK
Fan Speed Reading OK
Dispenser Speed Reading OK
Motor Speed Reading OK
Number of Motors (Dispensing) 3
Rail Line Flap Control OK
Seed Drill Position Display OK
Work Lighting Control OK
Hopper Lighting Control OK
Marker Control OK
Pre-emergent Marking Control OK
Adding Seed Batch during Work OK
Micro Seeding OK
Simultaneously Running Screens 5
Camera Input OK
GSM Modem OK

Müller Elektronik: ISOBUS DRILL-Controller

x Nelze dokoupit 
OK V základní výbavě