The counter current-based coolers FCHP serve to cool and dry press cakes or extrudate down to ambient levels. These machines use a highly-efficient counter-current system, where air flow is used to cool the material. They are designed to minimize the costs of maintenance and operation. Optimized air flow system secures low power input of the equipment.

Technology Description

The cooled material falls in through an airtight entry into the upper part of the equipment. The material is then evenly spread across the cooling screen. Cold air flows through the layer of the material. When optimal moisture and temperature are reached, the material falls through the screen into a hopper placed below the cooler and then is transported away for further processing.

Technical Parameters

The equipment is offered at a range of available capacities. The performance depends on the density, initial moistness and temperature of the material, and varies between 2 and 5 tons per hour. The equipment is always optimized for particular technological solutions and the customer’s requirements for output parameters.



The cooler can be supplemented with a spectrum of hoppers, conveyors and equipment for treatment and storage of the material. The best solution is usually our turnkey delivery, which fulfils your requirements and guarantees a solution optimized from both the technical and economic perspectives, as well as comprehensive automatization.