Loosening zone. The loosening depth has a wide range of 6 - 35 cm. Full-area undercut wings can be used for loosening from 6 to 20 cm. The three-row optimized cultivation chisels ensure very good loosening and intensive mixing of the soil with the plant residues.
|2||Wave-levelling zone. Levelling discs also increase the effect of incorporating plant residues.|
Clod crumbling and soil compaction zone. Optimum soil reconsolidation ensures good water infiltration and soil moisture rise.
High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.
Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.
The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.
TX 470 PS
TX 600 PS
TX 800 PS
|Working width||mm||4 700||6 200||7 900|
|Transport width||mm||3 000||3 000||3 000|
|Transport height||mm||3 300||4 000|
|Total machine length||mm||7 495||7 495||7 495|
|Working depth||mm||60 – 300||60 – 300||60 – 300|
|Number of ploughshares||pcs||16||19||25|
|Distance between ploughshares||mm||290||290||290|
|Number of ploughshare rows||pcs||3||3||3|
|Pitch of rows||mm||780||780||780|
|Release force of ploughshares||kg||450||450||450|
|Diameter of levelling disks||mm||460||460||460|
|Working performance||ha/h||4,8 – 7,2||6,4 – 9,6|
|Towing vehicle 1||kW
|150 - 220
200 - 300
|245 – 370
330 – 500
|295 – 440
400 – 600
|Working speed||km/h||8 – 12||8 – 12||8 – 12|
|Maximum transport speed 4||km/h||25||25||25|
|Maximum slope availability||°||6||6||6|
|Dimension of tyre - transport||19.0/45-17||19.0/45-17|
|Brake type / distribution 3, 4||air / two-line||air / two-line|
|Required pressure 3||kPa||8,5||8,5|
|Number of hydraulic circuits / pressure||bar||3 / 200||3 / 200|
|Number of hydrocouples / type||6 / ISO 12,5||6 / ISO 12,5|
|Tractor hitch requirement||TBZ kat. 3||TBZ kat. 3|
|Machine weight 2||kg||4 620||6 750||7 550|
1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with LTX roller.
3 Alternative of the hydraulic brake / operating pressure 130 ± 5 bar.
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
PS - half-carried foldable machine
Proper selection of the type of the rear roller contributing significantly to the final quality of the processing is very important. The soil is recompacted by the roller and then it is the same way crumbled and levelled. The selection of the type of the roller depends on the soil type and on the manner of use of the machine.
|Resistance against clogging||●●●○||●●●●||●●●●||●●●○|
|Suitability for stony soils||●●●○||●●●○||●●●○||●●●○|
|Suitability for wet soils||●●○○||●●●●||●●●●||●●●●|
|Resistance against clogging||●●●○||●●●●|
|Suitability for stony soils||●●●○||●●●○|
|Suitability for wet soils||●●●●||●●●●|